MPM MNP-04 Инструкция по эксплуатации онлайн [12/28] 464453

HOW TO USE THE HUMIDIFIER

1. Once the tank is ﬁlled with water, place it on the humidiﬁer base. Attach the handle (9) and

outlet lid (10).

2. Turn the nozzle ring in the lid (10) in the desired direction.

3. Plug the humidiﬁer to the mains and POWER it ON (2a). The humidifying process will start

and the LED display (2e) will interchangeably show ambient temperature (TEMP) and relative

humidity (HUMID).

ATTENTION! The humidiﬁer is designed to operate at ambient temperatures of 5 to 40°C.

4. Set a suitable humidifying intensity level using the MIST button (2b). There are three humid-

ifying intensity levels: 1 – low, 2 – medium, 3 – high. The currently set level is displayed in the

bottom section of the LED display (2e).

ATTENTION! The sound of dripping water is normal during operation and does not indicate a malfunction.

ATTENTION! If the outer surface of the humidiﬁer becomes covered with condensed water during operation,

power oﬀ the device immediately, disconnect it from the mains and wipe it dry.

5. You can use the TIMER (2c) to set the device to automatically power oﬀ after a speciﬁed

amount of time. Press the button repeatedly to select a power-oﬀ time: 1, 2, 4 or 8 h. Pressing

the timer button (2c) for the ﬁfth time will deactivate the function and the text ‘TIME’ on the

LED display will disappear.

6. The device can automatically adjust the humidity level in the room, but only upwards (the

device cannot decrease the humidity level) from 45 to 80% (every 5%) of relative humidity. To

activate this function, use the CONSTANT HUMIDITY/SLEEP MODE button (2d) After setting a

humidity level, the indicator on the LED display will return to showing the current humidity

value. To deactivate the humidity level control function, restart the humidiﬁer.

ATTENTION! Due to a number of parameters (temperature, pressure and air ﬂow), the indicated humidity level

may diﬀer from the actual humidity.

7. Press and hold the CONSTANT HUMIDITY/SLEEP MODE button (2d) for 3 seconds to deacti-

vate the LED display; the humidiﬁer will continue to operate (SLEEP mode). Press and hold the

button for another 3 seconds to turn the LED display back on.

8. You can operate the device using the remote control (13). Controlling the humidiﬁer using

the remote control is the same as using the buttons on the device, but separate buttons are

used for the humidity level control functions and the sleep mode.

9. Constantly monitor the water level in the water tank (6) to prevent an unexpected stop of

humidiﬁer operation. Low water tank level is signalled with a red icon showing a crossed out

water drop on the LED display. Maximum water consumption is approx. 300 ml/h.

10. To add a pleasant scent to the mist (aromatherapy), add up to 3-4 drops of an essential oil to

the reservoir (4). While adding the oil, the humidiﬁer must be powered oﬀ and disconnected

from the mains.

ATTENTION! Do not pour the oil directly into the water. This may cause damage to the humidiﬁer.

11. If you want to turn oﬀ the device, POWER it OFF (2a) and unplug it from the mains.