Laserliner DigiLevel Plus 80 081.252A Инструкция по эксплуатации онлайн [8/52] 479404

°C / °F / measured value

The ambient temperature is shown in °C and °F by briey

pressing the CAL button (3). Press again to switch back to

the measured value.

HOLD

Press the HOLD button (5) to hold the current measured

value on the display.

Acoustic signal

The acoustic signal can be switched on or off with button

(6). When the angle of slope stands at 0°, 45°, 90° or the

most recently stored value, this is indicated by an acoustic

signal.

When working with a changed angle reference

value, the acoustic signal is activated on reaching

the new reference value (0°, 45°, 90° display).

Backlighting

Auto Off function

The backlighting is switched ON/OFF by pressing

and holding button (6).

In order to preserve the batteries, the measuring device

switches off automatically if it is left idle for 3 minutes.

Changing the angle reference value

With button (2), it is possible to transfer angles elsewhere.

To do so, set the device to the desired slope and press

button (2). The display then changes to „0.0°“, „REF“

ashes on the display and the required reference angle is

set. The slope can now be transferred to other objects.

Press button (2) again to deactivate the angle reference.

The angle reference is not deactivated

by switching off the device.