Qtech QSW-8200-52T-AC — основные команды для настройки переключателей: руководство пользователя [10/77]

Превью страниц Страница 10 / 77

User Manual

Chapter 1. Commands for Basic Switch Configuration 10

www.qtech.ru

 Parameter: None.

 Default: None.

 Command mode: Admin Mode.

 Usage Guide: None.

 Example:

 Switch#disable

 Switch>

1.1.8 enable

 Command: enable [<1-15>]

 Function: Use enable command to enter Admin Mode from User Mode, or change the

privilege level of the users.

 Command mode: User Mode/ Admin Mode.

 Default: None.

 Usage Guide: To prevent unauthorized access of non-admin user, user authentication is

required (i.e. Admin user password is required) when entering Admin Mode from User

Mode. If the correct Admin user password is entered, Admin Mode access is granted; if

3 consecutive entry of Admin user password are all wrong, it remains in the User Mode.

When the user’s privilege is changed from the low level to the high level, it needs to

authenticate the password of the corresponding level, or else it will not authenticate

the password. Set the Admin user password under Global Mode with “enable

password” command.

 Example:

 Switch>enable

 Switch#

1.1.9 enable password

 Command: enable password [level <1-15>] [0 | 7] <password>

 no enable password [level <1-15>]

 Function: Configure the password used for enter Admin Mode from the User Mode,

 The “no enable password” command deletes this password.

 Parameter: level <1-15> is used to specify the privilege level, the default level is 15.

<password> is the password for the user. If input option 0 on password setting, the

password is not encrypted; if input option 7, the password is encrypted.

 Command mode: Global Mode

 Default: This password is empty by system default

 Usage Guide: Configure this password to prevent unauthorized entering Admin Mode.

It is recommended to set the password at the initial switch configuration. Also, it is

recommended to exit Admin Mode with “exit” command when the administrator

needs to leave the terminal for a long time.

1.1.10 end