Qtech QSW-8200-28T-AC-DC Команды для poe онлайн [5/10] 481627

User Manual

Chapter 1. Commands for PoE 5

www.qtech.ru

 Usage Guide: high-inrush current will be brought when nonstandard PD is powered

instantaneously, it will result PSE self-protection to make PD power failure. Here, if this

nonstandard PD must be powered, it needs to allow the high-inrush current.

 Example: Enable the allowed high-inrush current when nonstandard PD is powered

instantaneously.

 Switch(config)#power inline high-inrush enable

1.1.6 power inline legacy

 Command: power inline legacy enable

 no power inline legacy enable

 Function: Set whether or not to provide power supply for non-standard IEEE PD.

 Parameters: None.

 Command Mode: Global Mode.

 Default: Do not provide power supply for non-standard IEEE PD.

 Usage Guide: With this function enabled, the switch will be compatible with and

provide power supply for non-standard IEEE PD.

 Examples: Set the switch to provide power supply for non-standard IEEE PD.

 Switch(Config)#power inline legacy enable

1.1.7 power inline max (Global)

 Command: power inline max <max-wattage>

 no power inline max

 Function: Set the global max output power of PoE.

 Parameters: max-wattage: value of the max output power, in W. The ranging of 52T-

PoE and 28T-POE from 37 to 740W is valid.

 Command: Global Mode.

 Default: The global max output power of 52T-PoE and 28T-POE is 740W. The no power

inline max will resume the default configuration.

 Usage Guide: Setting a global max output power can guarantee a secure power supply

and an effective method to control the power consumed by connected subordinate

devices.

 Example: Set the global max output power to 50W.

 Switch(Config)#power inline max 50

1.1.8 power inline max (Port)

 Command: power inline max <max-wattage>

 no power inline max

 Function: Set the max output power of a specified port.

 Parameters: max-wattage: the value of the max output power, in mW, ranging from 1

to 15400mW (802.3af)/1 to 3000mW (802.3at), with a granularity of 100mW. Any value

less than 100mW will be taken as 100mW, that is, 1~100 equals 100, 15301~15400

equals 15400. But the value set by users will be maintained without being rounded up.