Qtech QSW-8200-28T-AC-DC Команды для протокола многоадресной рассылки онлайн [31/39] 481627

User Manual

Chapter 2. IPv6 Multicast Protocol 31

www.qtech.ru

 Switch (config)#ipv6 mld snooping

2.2.5 ipv6 mld snooping vlan

 Command: ipv6 mld snooping vlan <vlan-id>

 no ipv6 mld snooping vlan <vlan-id>

 Function: Enable MLD Snooping on specified VLAN; the “no” form of this command

disables MLD Snooping on specified VLAN.

 Parameter: <vlan-id> is the id number of the VLAN, with a valid range of <1-4094>.

 Command Mode: Global Mode

 Default: MLD Snooping disabled on VLAN by default

 Usage Guide: To configure MLD snooping on certain VLAN, the global MLD snooping

should be first enabled. Disable MLD snooping on specified VLAN with the no ipv6 mld

snooping vlan vid command

 Example: Enable MLD snooping on VLAN 100 under global mode.

 Switch (config)#ipv6 mld snooping vlan 100

2.2.6 ipv6 mld snooping vlan immediate-leave

 Command: ipv6 mld snooping vlan <vlan-id> immediate-leave

 no ipv6 mld snooping vlan <vlan-id> immediate-leave

 Function: Enable immediate-leave function of the MLD protocol in specified VLAN; the

“no” form of this command disables the immediate-leave function of the MLD protocol

 Parameter: <vlan-id> is the id number of specified VLAN, with valid range of <1-4094>.

 Command Mode: Global Mode

 Default: Disabled by default

 Usage Guide: Enabling the immediate-leave function of the MLD protocol will hasten

the process the port leaves one multicast group, in which the specified group query of

the group will not be sent and the port will be directly deleted.

 Example: Enable the MLD immediate-leave function on VLAN 100.

 Switch (config)#ipv6 mld snooping vlan 100 immediate-leave

2.2.7 ipv6 mld snooping vlan l2-general-querier

 Command: ipv6 mld snooping vlan < vlan-id > l2-general-querier

 no ipv6 mld snooping vlan < vlan-id > l2-general-querier

 Function: Set the VLAN to Level 2 general querier.

 Parameter: vlan-id: is the id number of the VLAN, with a valid range of <1-4094>

 Command Mode: Global Mode

 Default: VLAN is not a MLD Snooping L2 general querier by default.

 Usage Guide: It is recommended to configure an L2 general querier on a segment. If

before configure with this command, MLD snooping is not enabled on this VLAN, this

command will no be executed. When disabling the L2 general querier function, MLD

snooping will not be disabled along with it. Main function of this command is sending