Qtech QSW-8200-28T-POEAC- DC Команды для потокового монитора онлайн [6/11] 481628

User Manual

Chapter 2. Commands for RSPAN Configuration 6

www.qtech.ru

 Function: To configure reflector port, the no form of this command will delete the

reflector port.

 Parameter: <session>: Session ID, range between 1~7, <interface-number>: Interface

number.

 Command Mode: Global Mode.

 Default: Not configured.

 Usage Guide: This command configures the reflector port for the destination of mirror

data grams, and disables the MAC learning function of the specified port. The

configuration of reflector port is to change the mode of the local port from the

destination port mode to be the reflector mode. Hence, the configuration of reflector

port and the destination port are exclusive. The no command is used to restore the

reflector port to normal port. The source port, in access or trunk mode, should not be

added to RSPAN VLAN. When the reflector port is configured as springboard of CPU TX

direction mirroring, it must be configured as TRUNK port and allows the RSPAN VLAN

data passing, the Native VLAN should not be configured as RSPAN VLAN.

 Example:

 Switch(config)#monitor session 1 reflector-port ethernet1/0/3