Qtech QSW-8200-28T-POEAC- DC Команды интерфейса уровня 3 онлайн [10/47] 481628

User Manual

Chapter 1. Commands for Layer 3 Forwarding 10

www.qtech.ru

 Function: Enable the IP packet debug function: the “no debug IP packet” command

disables this debug function.

 Parameter: None

 Default: IP packet debugging information is disabled by default.

 Command mode: Admin Mode

 Usage Guide: Displays statistics for IP packets received/sent, including

source/destination address and bytes, etc.

 Example: Enable IP packet debug.

 Switch #debug ip packet

 IP PACKET: sent, src 200.1.1.35, dst 224.0.0.9, size 312, proto 17, vrf 0

 IP PACKET: rcvd, src 101.1.1.1, dst 224.0.0.9, size 312, proto 17, from Vlan200, vrf 0

1.2.11 debug ipv6 packet

 Command: debug ipv6 packet

 no debug ipv6 packet

 Function: IPv6 data packets receive/send debug message.

 Parameter: None

 Default: None

 Command Mode: Admin Mode

 Usage Guide:

 Example:

 Switch#debug ipv6 packet

 IPv6 PACKET: rcvd, src <fe80::203:fff:fe01:2786>, dst <fe80::1>, size <64>, proto <58>,

from Vlan1

Displayed information

Explanation

IPv6 PACKET: rcvd

Receive IPv6 data report

Src <fe80::203:fff:fe01:2786>

Source IPv6 address

Dst <fe80::1>

Destination IPv6 address

size <64>

Size of data report

proto <58>

Protocol field in IPv6 header

from Vlan1

IPv6 data report is collected from Layer 3

port vlan1