Qtech QSW-8200-28F-AC-DC — настройка DHCPv6: команды для управления опциями и политиками [52/79]

Превью страниц Страница 52 / 79

User Manual

Chapter 4. Commands for DHCPv6 option37, 38 52

www.qtech.ru

 Switch(Config-if-Ethernet1/0/1)# ipv6 dhcp snooping remote-id abc

4.1.13 ipv6 dhcp snooping remote-id option

 Command: ipv6 dhcp snooping remote-id option

 no ipv6 dhcp snooping remote-id option

 Function: This command enables DHCPv6 SNOOPING to support option 37, the no form

of this command disables it.

 Parameters: None.

 Default: Disable.

 Command Mode: Global configuration mode

 Usage Guide: Only after this command is configured, DHCPv6 SNOOPING can add

option 37 in DHCPv6 packets before sending it to server or relay agent. Make sure that

DHCPv6 SNOOPING has been enabled before execute this command. The system

disables option 37 of DHCPv6 SNOOPING by default.

 Example: Enable option 37 in DHCPv6 SNOOPING.

 Switch(Config)#ipv6 dhcp snooping enable

 Switch(Config)#ipv6 dhcp snooping remote-id option

4.1.14 ipv6 dhcp snooping remote-id policy

 Command: ipv6 dhcp snooping remote-id policy {drop | keep | replace}

 no ipv6 dhcp snooping remote-id policy

 Function: This command is used to configure the reforward policy of the system when

receiving DHCPv6 packets with option 37, among which the drop mode means that the

system simply discards it with option 37, keep mode means that the system keeps

option 37 unchanged and forwards the packets to the server and replace mode means

that the system replaces option 37 of current packets with its own before forwarding it

to the server. The no operation of this command sets reforward policy of DHCPv6

packets with option 37 as replace.

 Parameters: None.

 Default: Using replace mode to replace option 37 of current packets with system’s own.

 Command Mode: Global configuration mode

 Usage Guide: Since DHCPv6 client packets may already include option 37 information,

corresponding processing policy of DHCPv6 SNOOPING is required to develop. If the

forwarding policy is set as replace, option 37 has to be enabled in advance. Use replace

mode to replace option 37 of current packets with system’s own by default.

 Example: Configure the reforward policy of DHCPv6 packets with option 37 as keep for

DHCPv6 SNOOPING.

 Switch(Config)# ipv6 dhcp snooping remote-id policy keep

4.1.15 ipv6 dhcp snooping subscriber-id

 Command: ipv6 dhcp snooping subscriber-id <subscriber-id>