Qtech QSW-8200-28F-AC Команды для mstp онлайн [10/23] 481630

User Manual

Chapter 1. Commands for MSTP 10

www.qtech.ru

 Command mode: Port Mode

 Default: The link type is auto by default; The MSTP detects the link type automatically.

 Usage Guide: When the port is full-duplex, MSTP sets the port link type as point-to-

point; When the port is half-duplex, MSTP sets the port link type as shared.

 Example: Force the port 1/0/7-8 as point-to-point type.

 Switch(config)#interface ethernet 1/0/7-8

 Switch(Config-Port-Range)#spanning-tree link-type p2p force-true

1.1.15 spanning-tree maxage

 Command: spanning-tree maxage <time>

 no spanning-tree maxage

 Function: Set the max aging time for BPDU; the command “no spanning-tree maxage”

restores the default setting.

 Parameter: <time> is max aging time in seconds. The valid range is from 6 to 40.

 Command mode: Global Mode

 Default: The max age is 20 seconds by default.

 Usage Guide: The lifetime of BPDU is called max age time. The max age is co working

with hello time and forward delay. The parameters should meet the following

conditions. Otherwise, the MSTP may work incorrectly.

 2 * (Bridge_Forward_Delay - 1.0 seconds) >= Bridge_Max_Age

 Bridge_Max_Age >= 2 * (Bridge_Hello_Time + 1.0 seconds)

 Example: In global mode, set max age time to 25 seconds.

 Switch(config)#spanning-tree maxage 25

1.1.16 spanning-tree max-hop

 Command: spanning-tree max-hop <hop-count>

 no spanning-tree max-hop

 Function: Set maximum hops of BPDU in the MSTP region; the command “no spanning-

tree max-hop” restores the default setting.

 Parameter: <hop-count> sets maximum hops. The valid range is from 1 to 40.

 Command mode: Global Mode

 Default: The max hop is 20 by default.

 Usage Guide: The MSTP uses max-age to count BPDU lifetime. In addition, MSTP also

uses max-hop to count BPDU lifetime. The max-hop is degressive in the network. The

BPDU has the max value when it initiates from MSTI root bridge. Once the BPDU is

received, the value of the max-hop is reduced by 1. When a port receives the BPDU

with max-hop as 0, it drops this BPDU and sets itself as designated port to send the

BPDU.

 Example: Set max hop to 32.

 Switch(config)#spanning-tree max-hop 32