![Makita DGA511Z БЕЗ АКК. и ЗУ Инструкция по эксплуатации онлайн [8/28] 500059](/img/pdf.png)
Makita DGA511Z БЕЗ АКК. и ЗУ Инструкция по эксплуатации онлайн [8/28] 500059
![Makita DGA511Z БЕЗ АКК. и ЗУ Инструкция по эксплуатации онлайн [8/28] 500059](/views2/1628109/page8/bg8.png)
8 ENGLISH
4. Wheels must be used only for recommended
applications. For example: do not grind with
the side of cut-off wheel.
are intended for peripheral grinding, side forces
shatter.
5.
of correct size and shape for your selected
wheel.
6. Do not use worn down wheels from larger
power tools. Wheel intended for larger power tool
is not suitable for the higher speed of a smaller
Cutting-Off Operations:
1. Do not “jam“ the cut-off wheel or apply exces-
sive pressure. Do not attempt to make an
excessive depth of cut. Overstressing the wheel
or binding of the wheel in the cut and the possibil-
2. Do not position your body in line with and
behind the rotating wheel. When the wheel, at
-
3. When wheel is binding or when interrupting
a cut for any reason, switch off the power
tool and hold the power tool motionless until
the wheel comes to a complete stop. Never
attempt to remove the cut-off wheel from the
cut while the wheel is in motion otherwise
kickback may occur. Investigate and take correc-
tive action to eliminate the cause of wheel binding.
4. Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed and
carefully re-enter the cut.
walk up or kickback if the power tool is restarted in
the workpiece.
5. Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kick-
back. Large workpieces tend to sag under their
own weight. Supports must be placed under the
workpiece near the line of cut and near the edge
of the workpiece on both sides of the wheel.
6. Use extra caution when making a “pocket cut”
into existing walls or other blind areas.
-
1. Do not use excessively oversized sanding
disc paper. Follow manufacturers recommen-
dations, when selecting sanding paper. Larger
snagging, tearing of the disc or kickback.
Operations:
1. Be aware that wire bristles are thrown by the
brush even during ordinary operation. Do not
overstress the wires by applying excessive
load to the brush.
penetrate light clothing and/or skin.
2. If the use of a guard is recommended for wire
brushing, do not allow any interference of the
wire wheel or brush with the guard. Wire wheel
and centrifugal forces.
Additional Safety Warnings:
1. When using depressed centre grinding wheels,
wheels.
2. NEVER USE Stone Cup type wheels with this
grinder.
3. Be careful not to damage the spindle, the
lock nut. Damage to these parts could result in
wheel breakage.
4. Make sure the wheel is not contacting the
workpiece before the switch is turned on.
5. Before using the tool on an actual workpiece,
let it run for a while. Watch for vibration or
wobbling that could indicate poor installation
or a poorly balanced wheel.
6. -
form the grinding.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
9. Observe the instructions of the manufacturer
for correct mounting and use of wheels.
Handle and store wheels with care.
10. Do not use separate reducing bushings or
adaptors to adapt large hole abrasive wheels.
11.
12.
hole wheel, ensure that the thread in the wheel
is long enough to accept the spindle length.
13. Check that the workpiece is properly
supported.
14. Pay attention that the wheel continues to
rotate after the tool is switched off.
15. If working place is extremely hot and humid,
or badly polluted by conductive dust, use a
short-circuit breaker (30 mA) to assure opera-
tor safety.
16. Do not use the tool on any materials contain-
ing asbestos.
17. When use cut-off wheel, always work with
the dust collecting wheel guard required by
domestic regulation.
18. Cutting discs must not be subjected to any
lateral pressure.
Содержание
- Cordless angle grinder 1
- Applicable battery cartridge bl1815n bl1820 bl1820b bl1830 bl1830b bl1840 bl1840b bl1850 bl1850b bl1860b some of the battery cartridges listed above may not be available depending on your region of residence 2
- Due to our continuing program of research and development the speciications herein are subject to change without notice speciications may differ from country to country the weight may differ depending on the attachment s including the battery cartridge the lightest and heavi est combination according to epta procedure 01 2014 are shown in the table 2
- English 2
- Only use the battery cartridges listed above use of any other battery cartridges may cause injury and or ire 2
- Specifications 2
- Warning 2
- English 3
- Intended use 3
- Symbols 3
- The following show the symbols used for the equip ment be sure that you understand their meaning before use 3
- The noise level under working may exceed 80 db a 3
- The tool is intended for grinding sanding and cutting of metal and stone materials without the use of water 3
- The typical a weighted noise level determined according to en60745 3
- The vibration total value tri axial vector sum determined according to en60745 3
- Vibration 3
- Warning 3
- Wear ear protection 3
- Work mode surface grinding with normal side grip 3
- English 4
- Note the declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another 4
- Note the declared vibration emission value may also be used in a preliminary assessment of exposure 4
- Work mode disc sanding with anti vibration side grip 4
- Work mode disc sanding with normal side grip 4
- Work mode surface grinding with anti vibration side grip 4
- Ec declaration of conformity 5
- General power tool safety warnings 5
- Safety warnings 5
- Save all warnings and instruc tions for future reference 5
- Warning 5
- Cordless grinder safety warnings 6
- Caution 9
- Important safety instructions for battery cartridge 9
- Important safety instructions for wireless unit 9
- Save these instructions 9
- Tips for maintaining maximum battery life 9
- Warning 9
- Caution 10
- Functional description 10
- Installing or removing battery cartridge 10
- Save these instructions 10
- Indicating the remaining battery capacity 11
- Overload protection 11
- Tool battery protection system 11
- Caution 12
- Notice 12
- Overdischarge protection 12
- Overheat protection 12
- Releasing protection lock 12
- Shaft lock 12
- Speed adjusting dial 12
- Switch action 12
- Accidental re start preventive function 13
- Assembly 13
- Automatic speed change function 13
- Caution 13
- Electric brake 13
- Electronic torque control function 13
- Installing or removing wheel guard for depressed center wheel lap disc lex wheel wire wheel brush abrasive cut off wheel diamond wheel 13
- Installing side grip handle 13
- Notice 13
- Soft start feature 13
- Warning 13
- Caution 14
- For tool with clamp lever type wheel guard 14
- For tool with locking screw type wheel guard 14
- Installing or removing depressed center wheel or lap disc 14
- Warning 14
- For 100 mm 4 model 15
- For 115 mm 4 1 2 125 mm 5 model 15
- Installing or removing abrasive disc 15
- Installing or removing lex wheel 15
- Warning 15
- Caution 16
- Connecting a vacuum cleaner 16
- Grinding and sanding operation 16
- Operation 16
- Operation with abrasive cut off diamond wheel 16
- Warning 16
- Caution 17
- For 100 mm 4 model 17
- For 115 mm 4 1 2 125 mm 5 model 17
- Mm 5 8 16 mm 5 8 17
- Operation with wire cup brush 17
- Caution 18
- Installing the wireless unit 18
- Notice 18
- Operation with wire wheel brush 18
- What you can do with the wireless activation function 18
- Wireless activation function 18
- Notice 19
- Tool registration for the vacuum cleaner 19
- Starting the wireless activation function 20
- 1 wireless activation lamp 22
- Description of the wireless activation lamp status 22
- English 22
- The wireless activation lamp shows the status of the wireless activation function refer to the table below for the meaning of the lamp status 22
- Cancelling tool registration for the vacuum cleaner 23
- Before asking for repairs conduct your own inspection irst if you ind a problem that is not explained in the manual do not attempt to dismantle the tool instead ask makita authorized service centers always using makita replace ment parts for repairs 24
- English 24
- Troubleshooting for wireless activation function 24
- 1 dust cover 25
- 1 exhaust vent 2 inhalation vent 25
- Air vent cleaning 25
- Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance 25
- Caution 25
- Clean out the dust cover when it is clogged with dust or foreign matters continuing operation with a clogged dust cover may damage the tool 25
- English 25
- Maintenance 25
- Never use gasoline benzine thinner alcohol or the like discoloration deformation or cracks may result 25
- Notice 25
- Remove the dust cover from inhalation vent and clean it for smooth air circulation 25
- The tool and its air vents have to be kept clean regularly clean the tool s air vents or whenever the vents start to become obstructed 25
- Caution 26
- English 26
- If you need any assistance for more details regarding these accessories ask your local makita service center makita genuine battery and charger wireless unit for models with wireless activation function 26
- Note 1 in some european countries when using a diamond wheel the ordinary guard can be used instead of the special guard covering the both side of the wheel follow the regulations in your country 26
- Note some items in the list may be included in the tool package as standard accessories they may differ from country to country 26
- Optional accessories 26
- These accessories or attachments are recommended for use with your makita tool spec iied in this manual the use of any other accessories or attachments might present a risk of injury to persons only use accessory or attachment for its stated purpose 26
- M a k i t a c o r p o r a t i o n 28
- M a k i t a e u r o p e n v 28
- W w w m a k i t a c o m 28
Похожие устройства
- Makita M8100 Инструкция по эксплуатации
- Makita DGA518ZU без акк. и ЗУ Инструкция по эксплуатации
- Esab COOL 1 Инструкция по эксплуатации
- Esab 462151880 Инструкция по эксплуатации
- Esab CAN 70mm2 Инструкция по эксплуатации
- Esab Aristo Feed 3004w U8 Encl 10p Инструкция по эксплуатации
- Esab Aristo 4004i Pulse Инструкция по эксплуатации
- Elitech М 1900РБК Инструкция по эксплуатации
- Elitech 0704.014200 Инструкция по эксплуатации
- Elitech УЗИ 40/12 Инструкция по эксплуатации
- Росомз 05365КН PREMIER FavoriT 05365 Инструкция по эксплуатации
- Росомз 05364КН PREMIER FavoriT 05364 Инструкция по эксплуатации
- Scoole SC HT CM8 2000 WT Руководство по эксплуатации
- Scoole SC HT CM8 1500 WT Руководство по эксплуатации
- Scoole SC HT CM8 1000 WT Руководство по эксплуатации
- Hyundai H-HC7-20-UI291 Инструкция по эксплуатации
- Hyundai H-HC5-20-UI498 Инструкция по эксплуатации
- Hyundai H-HC5-10-UI496 Инструкция по эксплуатации
- Hyundai H-HC5-08-UI495 Инструкция по эксплуатации
- Hyundai H-HC2-15-UI697 Инструкция по эксплуатации