AXIOMET AX-507B Расширенная инструкция онлайн [2/7] 527856

1. GENERAL INSTRUCTIONS

This auto scan pen R/C/D meter fir SMD could fast precise measure small chip components.

To get the best service from this meter, please read this user’s manual carefully and observe the

detailed safety precautions strictly.

1.1. Precautions safety measures

• When using this meter the user must observe all normal safety rules concerning

1.1.1. During use

• Use the meter before must warm-up 30 seconds

• If the meter is used near noise generating equipment, be aware that display may become unstable

or indicate large errors.

• Do not use the meter if it looks damaged.

• Use the meter only as specified in this manual; otherwise the protection provided by the meter

may be impaired.

• Do not operate the meter around explosive gas, vapor, or dust.

• To avoid damages to the instrument, do not exceed the maximum limits of the input values

• Caution: Avoid working with voltages above 50VDC or 36VAC rms. Such voltages pose a shock

hazard and damage the meter

• When using this meter, keep your fingers away from the metal of the meter.

• Before changing functions, disconnect the test clip from the circuit under test.

• Replace the battery when the symbol appears. With a low battery, the meter might produce

false display.

1.1.2. Symbols

Symbols used in this manual and on thr meter:

Caution: refer to the instruction manual. Incorrect use may result in damage to the device

or its components.

Conforms to IEC1010

1.1.3. Instructions

• Before operating the meter, always disconnect from all sources of electric current and make sure

you are not charged with static electricity, which may destroy internal components.

• Any adjustment, maintenance ot repair work carried out on the meter while it is live should be

carried out only by appropriately qualified personnel, after having taken into account the

instructions in this present manual.

• If any faults or abnormalities are observed, take the instrument out of service and ensure that it

can not be used until it has been checked out.

• If the meter is not going to be used for a long time, take out the battery and do not store the

meter in high temperature or high humidity environment.

• Never use the meter unless the back cover and battery cover are in place and fastened fully.