AXIOMET AX-18B Расширенная инструкция онлайн [3/19] 527859

1. General instructions

This instrument complies with IEC 1010-1 (61010-1@IEC: 2001), CAT. II 1000V and CAT. III 600V

overvoltage standards. See Specifications.

To get the best service from this instrument, read carefully this user's manual and respect the

detailed safety precautions.

International symbols used on the Meter and in this manual are explained in chapter 1.1.3

1.1 Precautions safety measures

1.1.1 Preliminary

• Measurement category III is for measurements performed in the building installation.

NOTE: Examples are measurements on distribution boards, circuit-breakers, wiring, including

cables, bus-bars, junction boxes, switches, socket-outlets in the fixed installation, and equipment

for industrial use and some other equipment, for example, stationary motors with permanent

connection to the fixed installation.

• Measurement category II is for measurements performed on circuits directly connected to the low

voltage installation.

NOTE: Examples are measurements on household appliances, portable tools and similar equipment.

• Measurement category I is for measurements performed on circuits not directly connected to

MAINS.

NOTE: Examples are measurements on circuits not derived from MAINS, and specially protected

(internal) MAINS derived circuits. In the latter case, transient stresses are variable; for that reason,

requires that the transient withstand capability of the equipment is made known to the user.

• When using this Multimeter, the user must observe all normal safety rules concerning:

― Protection against the dangers of electric current.

― Protection of the Multimeter against misuse.

• For your own safety, only use the test probes supplied with the instrument. Before use, check that

they are in good condition.

1.1.2 During use

• If the meter is used near noise generating equipment, be aware that display may become unstable

or indicate large errors.

• Do not use the meter or test leads if they look damaged.

• Use the meter only as specified in this manual; otherwise, the protection provided by the meter

may be impaired.

• Use extreme caution when working around bare conductors or bus bars.

• Do not operate the meter around explosive gas, vapor, or dust.