AXIOMET AX-18B Расширенная инструкция онлайн [7/19] 527859

8) The meter is in Data Hold mode.

9) The meter is in Relative Measurement mode.

10) Display maximum data

11) Display minimum data

12) Low battery indication (Note: When this symbol appears, it means that the battery needs to be

replaced.)

13) Measurement units

14) This symbol means that the input is too large for the selected range.

2.3 Keypad

2.3.1 SELECT

I. At Ω

ΩΩ

Ω position

Switches between Resistance measurement, Diode Test and Continuity check.

II. At A mA µ

µµ

µA position

Switches between dc and ac current.

III. Power-up Option

Disables automatic power-off feature.

2.3.2 HOLD/LIGHT

Press it to enter and exit the Data Hold mode. Press it and hold 2 seconds, backlight on; if press it

and hold for seconds again, backlight off.

2.3.3 RANGE

At V~, V , Ω, A, mA and µA.

1. Press RANGE to enter the manual ranging mode.

2. Press RANGE to step through the ranges available for the selected function.

3. Press and hold RANGE for 2 seconds to return to autoranging.

2.3.4 EL

Press REL to enter and exit the Relative measurement mode. (Except Hz/DUTY)

2.3.5 MAX/MIN

This key is for measuring maximum value and minimum value. (Except Hz/Duty, Capacitance)

1) Press it to enter Max/Min mode.

2) Press it again; the LCD will display the Maximum Value.

3) Press it again; the LCD will display the Minimum Value.

4) Press and hold it for two seconds, the meter will return to normal measurement state.