AXIOMET AX-MS8250 Расширенная инструкция онлайн [4/22] 527871

* When the range of the value to be measured is unknown,

check that the range initially set on the multimeter is the

highest position.

* To avoid damages to the instrument, do not exceed the

maximum limits of the input values.

* Caution when working with voltages above 60Vdc or 30Vac

rms. Such voltages pose a shock hazard.

* When using the probes, keep your fingers behind the finger

guards.

* Before changing functions, disconnect the test leads from

the circuit under test.

* Disconnect circuits power and discharge all high-voltage

capacitors before testing resistance, continuity or diode.

* Before attempting to insert transistors for testing, always be

sure that test leads have been disconnected from any

measurement circuits．

* Components should not be connected to the hFE socket

when making voltage measurements with test leads．

* Before measuring current, turn off power to the circuit

before connecting the meter to the circuit.

* Change the battery when the symbol appears to

avoid incorrect data.

1.1.3 Symbols:

Symbols used in this manual and on the instrument:

Caution: refer to the instruction manual. Incorrect use may

result in damage to the device or its components.

Earth

This instrument has double insulation.

Fuse: F 500mA/250V