![Gigabyte Z490 AORUS ELITE (rev. 1.0) Инструкция онлайн [8/52] 528649](/img/pdf.png)
Gigabyte Z490 AORUS ELITE (rev. 1.0) Инструкция онлайн [8/52] 528649
![Gigabyte Z490 AORUS ELITE AC (rev. 1.0) Инструкция онлайн [8/52] 528648](/views2/1666591/page8/bg8.png)
USB Chipset:
- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
- 1 x USB Type-C
™
port with USB 3.2 Gen 1 support, available through the
internal USB header
- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Chipset+2 USB 2.0 Hubs:
- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x 4-pin ATX 12V power connector
2 x M.2 Socket 3 connectors
6 x SATA 6Gb/s connectors
1 x CPU fan header
1 x water cooling CPU fan header
3 x system fan headers
2 x addressable LED strip headers
2 x RGB LED strip headers
1 x front panel header
1 x front panel audio header
1 x USB Type-C
™
port, with USB 3.2 Gen 1 support
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
2 x Thunderbolt
™
add-in card connectors
1 x Clear CMOS jumper
1 x Q-Flash Plus button
Back Panel
Connectors
2 x USB 3.2 Gen 2 Type-A ports (red)
4 x USB 3.2 Gen 1 ports
4 x USB 2.0/1.1 ports
2 x SMA antenna connectors (1T1R)j
1 x HDMI port
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks
I/O Controller iTE
®
I/O Controller Chip
Hardware
Monitor
Voltage detection
Temperature detection
Fan speed detection
Watercoolingowratedetection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
- 8 -
j Only for the Z490 AORUS ELITE AC.
Содержание
- For more product details please visit gigabyte s website 1
- Rev 1001 12me z49elta 1001r 1
- To reduce the impacts on global warming the packaging materials of this product are recyclable and reusable gigabyte works with you to protect the environment 1
- User s manual 1
- Z490 aorus elite ac z490 aorus elite 1
- Copyright 2
- Disclaimer 2
- Documentation classifications 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 4 3
- Chapter 3 appendix 2 3
- Table of contents 3
- Z490 aorus elite ac motherboard layout z490 aorus elite ac motherboard block diagram 3
- Box contents 4
- J only for the z490 aorus elite ac 4
- Motherboard driver disc 5 four sata cables 4
- Note the m connector is reserved only no functionalities 4
- Quick installation guide 5 one antenn 4
- User s manual 5 one g connector 4
- Z490 aorus elite ac 4
- Z490 aorus elite ac motherboard layout 4
- Z490 aorus elite ac or z490 aorus elite motherboard 4
- Center subwoofer 5
- Cpu clk 100 500 mhz pci express 3 bus 5
- J only for the z490 aorus elite ac 5
- Lga1200 cpu 5
- Line in 5
- Line out 5
- Lpc bus 5
- Pci express 3 bus 5
- Rear speaker out 5
- S pdif out 5
- Speaker out 5
- Usb 3 gen 1 5
- Usb 3 gen 2 5
- Z490 aorus elite ac motherboard block diagram 5
- 1 installation precautions 6
- Chapter 1 hardware installation 6
- 2 product specifications 7
- 2 productspecifications 7
- 3 installing the cpu 10
- 4 installing the memory 10
- Dualchannelmemoryconfiguration 10
- Installing the cpu 10
- 5 installing an expansion card 11
- 6 back panel connectors 11
- Hdmi port 11
- Sma antenna connectors 1t1r 11
- Usb 2 1 port 11
- Usb 3 gen 1 port 11
- Center subwoofer speaker out 12
- Line in side speaker out 12
- Line out front speaker out 12
- Mic in side speaker out 12
- Optical s pdif out connector 12
- Rear speaker out 12
- Rj 45 lan port 12
- Usb 3 gen 1 port q flash plus port 12
- Usb 3 gen 2 type a port red 12
- Audiojackconfigurations 13
- Device and then remove it from the motherboard 13
- Hd audio manager application 13
- If you want to install a side speaker you need to retask either the line in or mic in jack to be side 13
- Pleasevisitgigabyte swebsitefordetailsonconfiguringtheaudiosoftware 13
- Prevent an electrical short inside the cable connector 13
- Speaker out through the audio driver 13
- Toenableorconfiguretheaudioamplifyingfunctionforthelineoutjack pleaseaccessthe 13
- When removing the cable pull it straight out from the connector do not rock it side to side to 13
- Whenremovingthecableconnectedtoabackpanelconnector firstremovethecablefromyour 13
- 7 internal connectors 14
- 2 3 atx_12v_2x2 atx_12v_2x4 atx 2x2 2x4 12v power connectors and 2x12 main 15
- Power connector 15
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 15
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 15
- With the use of the power connector the power supply can supply enough stable power to all the componentsonthemotherboard beforeconnectingthepowerconnector firstmakesurethepower supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 15
- 5 cpu_fan sys_fan1 2 3 fan headers 16
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 16
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 16
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 16
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 16
- Cpu_opt water cooling cpu fan header 16
- For how to turn on off the lights of the led strip please visit the unique features webpage of gigabyte s website 16
- Headers 16
- Led_c1 led_c2 rgb led strip headers 16
- Overheating overheating may result in damage to the cpu or the system may hang 16
- The fan header is 4 pin and possesses a foolproof insertion design most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design 16
- The headers can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 16
- Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercaponthe 16
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 17
- Chipset supports raid0 raid1 raid5 andraid10 refertochapter3 configuringaraidset forinstructions onconfiguringaraidarray 17
- Connect your addressable led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 17
- D_led1 d_led2 addressable led strip headers 17
- For how to turn on off the lights of the led strip please visit the unique features webpage of gigabyte s website 17
- No pin 17
- Pin no definition 17
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 17
- The headers can be used to connect a standard 5050 addressable led strip with maximum power rating of 5a 5v and maximum number of 1000 leds 17
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 17
- To enable hot plugging for the sata ports refer to chapter 2 bios setup settings io ports sataandrstconfiguration formoreinformation 17
- Follow the steps below to correctly install an m ssd in the m connector step 1 locate the m connector where you will install the m ssd use a screwdriver to unfasten the screw on the heatsink and then remove the heatsink step 2 locate the proper mounting hole based on the length of your m ssd drive if needed move the standoff to the desired mounting hole insert the m ssd into the m connector at an angle step 3 press the m ssd down and then secure it with the screw replace the heatsink and secure it to the originalhole makesuretoremovetheprotectivefilmfromthebottomoftheheatsinkbeforereplacingthe heatsink 18
- M2m_sb m2a_sb m socket 3 connectors 18
- Them connectorssupportm satassdsorm pciessdsandsupportraidconfiguration please note that an m pcie ssd cannot be used to create a raid set either with an m sata ssd or a sata harddrive tocreatearaidarraywithanm pciessd youmustsetuptheconfigurationinuefi biosmode refertochapter3 configuringaraidset forinstructionsonconfiguringaraidarray 18
- Installation notices for the m and sata connectors 19
- M2a_sb 19
- M2m_sb 19
- The availability of the sata connectors may be affected by the type of device installed in the m connector the m2m_sb connector shares bandwidth with the sata3 4 5 connectors the m2a_sb connector shares bandwidth with the sata3 1 connector refer to the following tables for details 19
- Ci chassis intrusion header connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 20
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 20
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 20
- F_audio front panel audio header 20
- F_panel front panel header 20
- Gnd 7 faudio_jd 20
- Hd hard drive activity led connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 20
- Line2_r 10 sense 20
- Mic2_l 6 sense 20
- Mic2_r 8 no pin 20
- Nc 9 line2_l 20
- Nc no connection 20
- Pin no definition pin no definition 20
- Pled pwr_led power led 20
- Pw power switch connects to the power switch on the chassis front panel you may configurethewaytoturnoffyoursystemusingthepowerswitch refer to chapter 2 bios setup settings platform power for more information 20
- Res reset switch connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 20
- S3 s4 s5 off 20
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 20
- Speak speaker connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 20
- System status led 20
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 20
- Thefrontpanelaudioheadersupportshighdefinitionaudio hd youmayconnectyourchassisfront panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 20
- Cord from the power outlet to prevent damage to the usb bracket 21
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power 21
- F_u32 usb 3 gen 1 header 21
- F_u32c usb type 21
- F_usb1 f_usb2 usb 2 1 headers 21
- Gnd 11 d2 18 ssrx2 21
- Gnd 11 vbus 18 d 21
- Gnd 14 sstx2 21
- Header with usb 3 gen 1 support 21
- Pin no definition pin no definition 21
- Pin no definition pin no definition pin no definition 21
- Power 5v 6 usb dy 21
- Power 5v 7 gnd 21
- Rx1 12 tx2 19 d 21
- Rx1 13 tx2 20 cc2 21
- Ssrx1 10 nc 17 ssrx2 21
- Ssrx1 9 d1 16 gnd 21
- Sstx1 12 d2 19 vbus 21
- Sstx1 13 gnd 20 no pin 21
- Theheaderconformstousb3 gen1andusb2 specificationandcanprovidetwousbports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 21
- Theheaderconformstousb3 gen1specificationandcanprovideoneusbport 21
- Theheadersconformtousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 21
- Tx1 10 sbu2 17 gnd 21
- Tx1 9 sbu1 16 rx2 21
- Usb dx 10 nc 21
- Usb dx 8 gnd 21
- Usb dy 9 no pin 21
- Vbus 14 gnd 21
- Vbus 8 cc1 15 rx2 21
- Vbus 8 d1 15 sstx2 21
- A metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 22
- Add in card 22
- Add in card connectors 22
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one damage to your devices may occur if the battery 22
- Bat battery 22
- Clk 12 rst 22
- Contact the place of purchase or local dealer if you are not able to replace the battery by 22
- Data input 11 nc 22
- Data output 7 chip select 22
- Is replaced with an incorrect model 22
- Nc 10 nc 22
- No pin 9 irq 22
- Of the battery the positive side should face up 22
- Pin no definition pin no definition 22
- Power 3 v 8 gnd 22
- Replace the battery 4 plug in the power cord and restart your computer 22
- Spi_tpm trusted platform module header 22
- Supports a thunderbol 22
- Thb_c1 thb_c2 thunderbol 22
- The connectors are used to connect to a gigabyte thunderbolt add in card 22
- Thebatteryprovidespowertokeepthevalues suchasbiosconfigurations date andtimeinformation in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 22
- Used batteries must be handled in accordance with local environmental regulations 22
- When installing the battery note the orientation of the positive side and the negative side 22
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or use 22
- You may connect an spi tpm trusted platform module to this header 22
- Yourself or uncertain about the battery model 22
- After system restart go to bios setup to load factory defaults select load optimized 23
- Always turn off your computer and unplug the power cord from the power outlet before clearing 23
- Clr_cmos clear cmos jumper 23
- Cpu cpu status led dram memory status led vga graphics card status led boot operating system status led 23
- Cpu dram vga boot status leds 23
- Defaults ormanuallyconfigurethebiossettings refertochapter2 biossetup forbios configurations 23
- For how to use q flash plus please visit the unique features webpage of gigabyte s website 23
- Open normal 23
- Q flash plus allows you to update the bios when your system is off s5 shutdown state save the latest biosonausbthumbdriveandplugitintothededicatedport andthenyoucannowflashthebios automaticallybysimplypressingtheq flashplusbutton theqfledwillflashwhenthebiosmatching andflashingactivitiesstartandwillstopflashingwhenthemainbiosflashingiscomplete 23
- Qflash_plus q flash plus button 23
- Short clear cmos values 23
- The cmos values 23
- The status leds show whether the cpu memory graphics card and operating system are working properly after system power on if the cpu dram vga led is on that means the corresponding device is not working normally if the boot led is on that means you haven t entered the operating system yet 23
- Usethisjumpertoclearthebiosconfigurationandresetthecmosvaluestofactorydefaults toclear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 23
- 1 startup screen 24
- Chapter 2 bios setup 24
- 2 the main menu 25
- Advanced mode function keys 25
- 3 favorites f11 26
- 4 tweaker 27
- Advanced cpu settings 27
- Avx offset 27
- Cpu base clock 27
- Cpu clock ratio 27
- Cpu over temperature protection 27
- Cpu upgrade 27
- Enhanced multi core performance 27
- Igp ratio 27
- Ring ratio 27
- Cpu eist function 28
- Cpu flex ratio override 28
- Cpu flex ratio settings 28
- Cpu thermal monitor 28
- D per core ht disable setting 28
- Energyefficientturb 28
- Fclk frequency for early power on 28
- Ht disable 28
- Hyper threading technology 28
- Intel r speed shift technology inte 28
- Intel r turbo boost technology 28
- No of cpu cores enabled 28
- Race to halt rth 28
- Ring to core offset down bin 28
- Speed shift technology 28
- Voltage optimization 28
- C10 state support 29
- C3 state support 29
- C6 c7 state support 29
- C8 state support 29
- Cpu enhanced halt c1e 29
- D active turbo ratios 29
- D c states control 29
- Frequency clipping tvb 29
- Package c state limit 29
- Turbo ratio 1 core active 10 core active 29
- Voltage reduction initiated tvb 29
- Advanced memory settings 30
- Channel interleaving 30
- Core current limit amps 30
- D turbo per core limit control 30
- D turbo power limits 30
- Dram power limit watts dram power limit time 30
- Extremememoryprofile x m p 30
- Memory multiplier tweaker 30
- Memory odd ratio 100 133 or 200 266 30
- Memory ref clock 30
- Package power limit tdp watts package power limit time 30
- Rank interleaving 30
- System memory multiplier 30
- Advanced voltage settings 31
- D d channels standard timing control channels advanced timing control channels 31
- Dram voltage ch a b cpu vccio cpu vccio2 cpu system agent voltage vcc substained vccpll vccpll oc vccvtt pch core 31
- Memory boot mode 31
- Memory channel detection message 31
- Memory channels timings 31
- Memory enhancement settings 31
- Misc timing control 31
- Realtime memory timing 31
- Spd info 31
- Svid offset bclk adaptive voltage cpu graphics voltage vaxg 31
- Vcore voltage mode 31
- 5 settings 32
- Dmi aspm 32
- Pch aspm 32
- Peg aspm 32
- Platform power 32
- Platform power management 32
- Power loading 32
- Resume by alarm 32
- Soft off by pwr bttn 32
- Above 4g decoding 33
- Ac back 33
- Aperture size 33
- Audio controller 33
- Dvmt pre allocated 33
- Dvmt total gfx mem 33
- Initial display output 33
- Internal graphics 33
- Io ports 33
- Ioapic 24 119 entries 33
- Onboard lan controller 33
- Pcie bifurcation support 33
- Rc6 render standby 33
- Aggressive lpm support 34
- Ipv4 http support 34
- Ipv4 pxe support 34
- Ipv6 http support 34
- Ipv6 pxe support 34
- Legacy usb support 34
- Mass storage devices 34
- Media detect count 34
- Network stack 34
- Networkstackconfiguration 34
- Nvmeconfiguration 34
- Pxe boot wait time 34
- Sata controller s 34
- Sata mode selection 34
- Sataandrstconfiguration 34
- Usb mass storage driver support 34
- Usbconfiguration 34
- Xhci hand off 34
- 3dmark01 enhancement 35
- Case open 35
- Configuredasesata 35
- Ez raid 35
- Hot plug 35
- Intel platform trust technology ptt 35
- Leds in sleep hibernation and soft off states 35
- Leds in system power on state 35
- Max link speed 35
- Miscellaneous 35
- Pc health status 35
- Port 0 1 2 3 4 5 35
- Reset case open status 35
- Software guard extensions sgx 35
- Trusted computing 35
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 36
- Fan control mode 36
- Fan control use temperature input 36
- Fan fail warning 36
- Fan speed 36
- Fan speed control 36
- Fan stop 36
- Flow rate 36
- Monitor 36
- Smart fan 5 36
- Temperature 36
- Temperature interval 36
- Temperature warning control 36
- 6 system info 37
- Access level 37
- Plug in devices info 37
- Q flash 37
- System date 37
- System language 37
- System time 37
- 7 boot 38
- Boot option priorities 38
- Bootup numlock state 38
- Fast boot 38
- Full screen logo show 38
- Sata support 38
- Security option 38
- Vga support 38
- Administrator password 39
- Csm support 39
- Lan pxe boot option rom 39
- Mouse speed 39
- Network stack driver support 39
- Next boot after ac power loss 39
- Other pci devices 39
- Storage boot option control 39
- Usb support 39
- Windows 10 features 39
- Preferred operating mode 40
- Secure boot 40
- User password 40
- 8 save exit 41
- Boot override 41
- Exit without saving 41
- Load optimized defaults 41
- Loadprofiles 41
- Save exit setup 41
- Saveprofiles 41
- 1 configuring a raid set 42
- 1 configuringaraidset 42
- A installing sata hard drive s in your computer 42
- B configuringsatacontrollermodeinbiossetup 42
- Before you begin please prepare the following items 42
- C 1 using ez raid 42
- Chapter 3 appendix 42
- Configuringtheonboardsatacontroller 42
- Raid levels 42
- C 2 uefiraidconfiguration 43
- C 3 configuringlegacyraidrom 43
- 2 installing an inte 44
- 2 installing an intel optane memory 44
- Install the sata raid ahci driver and operating system 44
- Installation guidelines a 1 installation in ahci mode 44
- Installing the operating system 44
- Memory 44
- System requirements 44
- A 2 installation in intel rst premium with intel optane system acceleration mode 45
- 3 drivers installation 46
- Regulatory notices 47
- United states of america federal communications commission statement 47
- Contact us 52
- Gigabyte esupport 52
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 52
Похожие устройства
- Gigabyte Z390 I AORUS PRO WIFI (rev. 1.0) Инструкция
- Gigabyte Z390 AORUS XTREME WATERFORCE 5G (rev. 1.0) Инструкция
- Gigabyte Z390 AORUS XTREME WATERFORCE Инструкция
- Gigabyte Z390 AORUS MASTER G2 Edition Инструкция
- Gigabyte Z390 AORUS ULTRA (rev. 1.0) Инструкция
- Gigabyte Z390 AORUS PRO WIFI (rev. 1.0) Инструкция
- Gigabyte Z390 AORUS PRO Инструкция
- Gigabyte Z390 AORUS MASTER Инструкция
- Meyer sound CQ-1 Руководство пользователя
- Meyer sound CQ-2 Руководство пользователя
- Meyer sound UM-1P Руководство пользователя
- Meyer sound UM-100P Руководство пользователя
- Meyer sound UPM-1P Руководство пользователя
- Meyer sound UPA-1P Руководство пользователя
- Meyer sound UPA-2P Руководство пользователя
- Meyer sound USW-1P Руководство пользователя
- Kenwood KDC-4590R Инструкция
- Gigabyte Z390 AORUS ELITE (rev. 1.0) Инструкция
- Gigabyte H470I AORUS PRO AX (rev. 1.0) Инструкция
- Gigabyte H470 AORUS PRO AX (rev. 1.0) Инструкция