BEHA-AMPROBE BM078 Расширенная инструкция онлайн [6/24] 529183

AmpTip™ indicators where applicable) as

much as possible to get the best measuring

accuracy. For removal, press the jaw trigger and remove the jaws from the

conductor(s).

Adjacent current-carrying devices such as transformers, motors and conductor wires

may affect measurement accuracy. Keep the jaws away from them as much as

possible to minimize influence.

WARNING

This Clamp-on meter series is designed to directly apply around or remove from

uninsulated hazardous live conductors. But still, individual protective equipment must

be used if hazardous live parts in the installation where measurement is to be carried

out could be accessible. Do not use the meter to measure currents above the rated

frequency (400Hz). Circulating currents may cause the magnetic circuits of the Jaws

reach a hazardous temperature.

Clamp-on AmpTip

ACA; AmpTip

DCA (Models 035 & 037 only)

Input is made via the clamp jaws where best accuracy is specified near the jaw TIP-

CENTER area for low-current measurements of thin conductors. Defaults at ACA.

Press SELECT button momentarily to select DCA for Models 035 & 037.