Home
Главная
Kuppersberg
Варочная Поверхность
FT6VS09
Инструкция по эксплуатации Страница: 16

Kuppersberg FT6VS09 Инструкция по эксплуатации онлайн [16/20] 64006

F5 - F7 = Active double cooking zone indicator

F8 = Active triple cooking zone indicator

G = Cooking zone display

N = Timer Display

Based on the model owned, the first time the stove top is

turned on it may be in the safety position, with the LED of

the “Keybuttonwarninglight” (B1) on.

In order to use the stove top it is necessary to press sensor “B”

for 3 seconds until the warning light turns off.

If the appliance is not used for at least a minute, the key

function activates automatically.

- The appliance may be turned on by selecting start-up sensor

“A” (ON/OFF). A zero appears on all displays for 10 seconds.

If no operation is carried out within the next 10 seconds the

stove top turns off.

- It is possible to turn a stove top element on by selecting the

“E+” or “E-” sensors within 10 seconds. If the “E+” sensor is

used, the display shows selection 1, if the “E-” sensor is used,

the display shows selection 9.

- Once this operation has been completed it is possible to

choose temperature adjustments using the “+” or “-” buttons.

- The stove top element may be turned off by selecting “0”

with the E sensor, after 3 seconds the cooking area turns off.

It is also possible to turn a stove top element off by selecting

the “E+” and “E-” sensors at the same time.

- The stove top may be turned off by selecting the main start-

up sensor “A” (ON/OFF). If all stove top elements are on “0”,

the stove top turns off after 10 seconds.

-Intheeventthehobisequippedwithdoublezoneplates:

- Select the desired element and adjust the power using the

“E+” or “E-” buttons.

- Once the power has been adjusted select button “F4” to

activate the double zone (LED “F5” will switch on).

- To deactivate it, select button “F4” and the LED will switch

off.

-Intheeventthehobisequippedwithtriplezoneplates:

- Select the desired element and adjust the power using the

“E+” or “E-” buttons.

- Once the power has been adjusted select button “F6” to

activate the double zone (LED “F7” will switch on).

- After having activated the double zone one can activate the

triple zone by selecting button “F6” (LED “F8” will switch on).

- To deactivate the extended zones select button “F6” several

times until LEDs “F7” and “F8” switch off.

ATTENTION! The activation sequence of the triple zone is

the following: …1st zone, ….2nd zone, …3rd zone and then

it goes back to the 1st zone.

E.g.: if the hob is in the 2nd cooking zone and one wishes to

go back to the 1st one, select button “F6” taking the appliance

to the 3rd cooking zone and then select again to take it back

to the 1st.

- If an object is placed above the controls, the stove top will

automatically change to the OFF position.

- When an element is brought to the OFF position and the glass

surface temperature is above 50°, the cooking area involved

will show an illuminated “H” on its display.

•KeyFunction:

To prevent children or people- requiring supervision- from

using the cooktop, all functions can be blocked with the

“B” button.

- To activate or deactivate, press the “B” button for

approximately 2 seconds. The function is activated when the

“B1” indicator is turned on.

- If the appliance is on and the key function is activated, the

“A” (ON/OFF) button works in the same way.

- If the hob us shut off with the key function active, the next

time it is started the hob will have the same engaged therefore,

deactivate the key function “B”.

•Heatup(Rapidheating):

The “Heatup” function can be used to set the cooking zone

to its maximum temperature for a specified period of time,

after which the temperature will return to a lower value

selected previously.

To activate the “Heatup” function select button “E+” of the

desired cooking zone until taking it to position 9, selecting

the button again, on the display (next to 9) a decimal point “•”

will appear for 5 sec., this means that the “Heatup” function

is active.

The desired power level (between 1 and 8) should be selected

within 5 seconds. If power level 9 is selected, the function is

disabled.

To deactivate the “Heatup” function, simply select the “+”

button and hold it down until setting 9 is reached and the

decimal point disappears from the display.

When the “Heatup” function is active, the previously selected

temperature level may be increased by pressing the “+” button.

Once the cooking zone has reached the selected temperature,

the “Heatup” function is automatically deactivated and the

hob emits a BEEP.

The cooking zone will operate in a constant manner, at the

set power level.

•Timer:

This function makes it possible to set the cooking time after

which the zone will turn off.

Complete the following steps to activate it:

- Press the “D” (+) button (00 will appear on the display), or

press the “C” (-) button (99 will appear on the display).

- All cooking zone displays will show a lower case “t”.

- Select the cooking zone that the timer will be used on using

the “E” button.

- Set cooking level using the “E+” and “E-” buttons.

- Set cooking time using the “D” (+) and “C” (-) buttons.

- The end of the established cooking time will be signaled by

an acoustic BEEP (that can be deactivated by pressing “D” (+)

or “C” (-) or “E+” and “E-” on that specific cooking zone).

The display of the zone with an active TIMER will alternately

display a lower case “t” and the temperature level that has

been set.

In order to deactivate the function, before the set time ends,

press “C” (-) and bring the time down to zero.

The Timer may only be activated on one cooking zone at

a time.

•MinuteMinder:

This function makes it possible to set and acoustic reminder

during the cooking time that will not turn o the cooking zone.

Complete the following steps to activate it:

- Press the “D” (+) button (00 will appear on the display), or

press the “C” (-) button (99 will appear on the display).

- Set cooking time using the “D” (+) and “C” (-) buttons.

- At the end of the established timeframe there will be an

acoustic BEEP (it can be deactivated by pressing “D” (+) or “C”

(-)).

In order to deactivate the function, before the set time ends,

- 16 -

Kuppersberg FT6VS09 Инструкция по эксплуатации онлайн [16/20] 64006

Содержание

Похожие устройства