ASRock EPC612D8A-TB — установка драйвера во время установки ОС в режиме AHCI/RAID [16/17]

Превью страниц Страница 16 / 17

How to load the driver during OS installation using F6 when in

AHCI/RAID mode

In order to install an operating system onto a single Serial ATA hard drive when the

system is in RAID mode or AHCI mode, the F6 installation method must be used to

load the Intel® Rapid Storage Technology driver during operating system

installation.

Note

You do not need to use the F6 installation method to install a RAID

driver on Microsoft Windows 7 and Microsoft Windows 8 because

Intel provided a RAID driver as part of the final package.

Use the following steps to install the Intel® Rapid Storage Technology driver using

the F6 installation method.

1. Press F6 when you see a message in the status line that says, Press F6 if you

need to install a third party SCSI or RAID driver. This message appears at

the beginning of Windows

setup (during text-mode phase).

Note

Nothing will happen immediately after pressing F6. Setup will

temporarily continue loading drivers. You will then be prompted with a

screen asking you to load support for mass storage device(s).

2. Press S to Specify Additional Device.

3. When you see a prompt that says, Please insert the disk labeled

Manufacturer-supplied hardware support disk into Drive A:, insert a floppy

disk containing the following files: IAAHCI.INF, IAAHCI.CAT, IASTOR.INF,

IASTOR.CAT, IASTOR.SYS, and TXTSETUP.OEM.

Note

You can use the Floppy Configuration Utility to create a floppy disk

with the necessary files.

If you do not have a floppy drive on your system, you can use a USB

floppy drive or create a slipstream version of the operating system.