Drazice TO 5 IN Инструкция по эксплуатации онлайн [30/54] 68027

- 30 -

Connection of the heater to electric network shall be executed following the plumbing fixture. In order to

enhance the protection of coupling in bathrooms and shower corners pursuant to ČSN 332000-7-701, the

appliance is provided with a grounding terminal for connecting with a yellow-green protective conductor

on minimum section 4 mm2. Access to the electric part of the heater is enabled only upon disconnecting

the heater from power supply and unscrewing the guard of the heater.

The degree of protection of electric parts of the heater is IP 24.

Respect the rules of protection against electricity injuries in accordance with ČSN 33 2000–4-41.

9. HEATER COMMISSIONING

Once connected to the water supply, the heater can be put in service.

Procedure:

a) check the power and water main installation

b) open the hot water valve on the combination faucet

c) open the cold water inlet valve to the heater.

d) as soon as the water starts running through the hot water valve, the heater is filled and the valve

closes.

e) using the front-end main switch open electricity and thus the heater activates.

Before first use, or after longer periods, it is necessary to ensure flushing, irrigation and

ventilation heater before starting the heating. The first heating tank must be monitored.

10. IMPORTANT NOTICE

 Without a confirmation issued by an authorised company about performed

electrical and plumbing fixture the warranty certificate shall be void.

 The hot water outlet must be equipped with a combination faucet.

 It is not allowed to handle the thermostat in any manner whatsoever, aside

from temperature resetting with a control button.

 All electric installation handling, adjustment and replacement of the regulation

elements shall only be performed by an authorised service company.

 The thermal fuse must not be turned off. The non-reversible thermal fuse

discontinues electric power input to the heating element should the thermostat

fail, if the water temperature in the heater exceeds 99°C.

Disposal of packaging material and functionless product

A service fee for providing return and recovery of packaging material has been

paid for the packaging in which the water heater was delivered.

Was paid pursuant to Act No. 477/2001 Coll., as amended, at EKO-KOM a.s. The

client number of the company is F06020274. Take the product packages to a

waste disposal place designated to that purpose by the municipality. When the

operation terminates, disassemble and transport the discarded and

unserviceable heater to a waste recycling centre (collecting yard), or contact the

manufacturer.