Conqueror VR-799+ Инструкция по эксплуатации онлайн [13/21] 69808

Conqueror VR-799+ Инструкция по эксплуатации онлайн [13/21] 69808
Separate outdoor unit installation, the technical installation considerations
involved, non-professional installation, you may have a negative performance,
the company offers the following important safety matters reference in this:
Before installation, disconnect the cathode-line fuse, separate outdoor unit
installed, replace the original position. To confirm the polarity of the power
supply, install the negative, and then install the positive.
1.
chrome strips in the front of the tank , generally separate outdoor
unit installation location, generally placed at within the front grille,
chrome-type grille, cause changes in the traveling waveform, or to
change the direction of travel of the original radar, equal to confounding
factors in the direction of travel in radar and thus changed, thereby
affecting separate outdoor unit mounted in the grille receives distance
performance.
2.
tank before the lack of space , water tank indoor temperature is high,
the water tank is narrow or insufficient space fixed separate outdoor unit
or set wave amplifier installed in Hibachi air inlet.
3.
Waveguide obstacles , radar guided wave tube is a set wave, like a TV
antenna, installation location and installation angle will affect the
reception.In addition, before the waveguide metal obstructions will affect
radar reception.
4.
Current amplifier disposal , special attention should be installed before
the separate outdoor machine adopts intelligent power management
system, a patented pulse start switch will be particularly sensitive to the
positive and negative power supply installed, as much as possible to rule
out power across the reverse current or -current amplification rectifier
position, reducing the impedance to avoid host with separate outdoor unit
passed exception occurs.
5.
Negative ground impedance number , due to the separate products,
intelligent power management system, the phone starts off pulse switch,
started the car, because the goods voltage overshoot caused the current
instability, the system will automatically turn off the power, single
precision has patent pulse switch for opening and closing, on the positive
and negative power installation will be particularly sensitive, in principle,
possible positive and negative battery contacts, reduce negative contact
impedance is too large, and to affect radar power start or not.
6.
Communication number is not linked , due to the power management
system, the opening and closing switch pulse power, quite sensitive and
vulnerable, installation, please install the outdoor unit, then install the
extension circuit, and finally access the battery, special enough to
polarity, the first install real pole before installing positive, in order to
reduce the pulse, to avoid sporadic contact short-circuit, disconnect the
fuse, and then install the cathode, clip mounts the negative, and then
check the outdoor unit positive and negative power installed correctly,
check the fuse on the positive line .
Ten. Separate
outdoor unit
installation

Содержание

Скачать