Hi WS 6521 C Инструкция по эксплуатации онлайн [14/35] 587430

7. REPLACING THE BULB

Always switch off the electrical

supply before carrying out any

operation

LED bulb does not operate is

possible to remove as shown in

Figure 12

A new bulb to be supplied from

service points is replaced with

the same reoperation.

Cables are designed with

sockets. The plug in should

be made according to previous

connection.

Note: Remove the holder on the LED bulb as shown in Figure 12.2. Put

the new LED bulb on the holder housing of the LED bulb you removed as

shown in Figure 12.1.

8. MAINTENANCE OF THE CHIMNEY HOOD

• Device should be unplugged or switch should be turned off before

cleaning and maintenance procedures.

• Metal lter should be cleaned once a month with hot soapy water or

in the dishwasher, if possible. (60 °C)

• Remove the aluminum cartridge lter by pressing on the spring

catches on the side. Do not ret before drying after wash.

• Outer surface of the extractor hood should be wiped with a damp

cloth soaked with soapy water.

• Make sure electronic parts do not contact with water or similar

materials.

• For inox products, using inox cleaning and maintenance products

available in the market will provide longer usage life for your device.

• Aluminum lters can be washed in dishwasher. After several washes,

aluminum lters may change colour. This is normal and lters do not

need to be replaced.

Red

Black

Figure 12