Timberk TAP FL250 SF (BL) Инструкция по эксплуатации онлайн [12/16] 590133

IM2020

7. CONTROL PANEL

Fig. 2

*Image is for reference only and may differ from actual control panel.

- on/off button

NIGHT LIGHT – night mode of operation

SLEEP/1/2/3 – speed indicators

SPEED – purification speed selection button

TIMER – timer settings button

UV – UV lamp button

HEPA/PRE – filter changing reminder indicator. HEPA – HEPA filter, PRE – pre-filter.

8. OPERATION OF THE DEVICE

Turning On/Off

To turn on the device, press the button on the control panel. Operation indicator will be glowing at the

lower part of the device. To turn off the device, press the button again, the indicator will go out.

Ion generator – ionization function starts automatically after turning on the device. The function is turning off

after the device turns off.

Timer function

The device can be programmed to turn off after a certain amount of time. To program the timer, press

“TIMER” button. Time can be selected in the following sequence – 2-4-8 hours.

Fan speed adjustment

The device can operate in the following speed modes – SLEEP – minimal speed for silent operation during

sleep, “1” (low speed), “2” (medium speed), “3” (high speed). To select the speed press the “SPEED” button

several times and select the speed mode. Selected speed mode will be shown by indicators.

«HEPA/PRE» indicators

When one of the indicators is turned on it is necessary to change the specific filter. After the filter has been

changed, to reset the indicator press both TIMER and UV button for 3 seconds. The indicator will flash three

times and then will turn off.