Candy LB CTS 100 T Инструкция по эксплуатации онлайн [5/6] 591642

USE OF THE SELECTION CONTROLS

. SPIN SPEED SELECTOR KNOB

This control allows you to select the speed of the final spin.

This knob selects the final spin speed. To select a speed,

press down and turn until the desired speed coincides with

the selector mark.

The final spin cycle reaches the maximum speed selected in

non-delicate programmes. The middle and final spin cycles

for mixed, synthetics and delicate programmes is carried out

at 400 r.p.m.

If you do not want a spin cycle, coincide the spin exclusion

symbol with the selector mark.

THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.

. ANTI-CREASING BUTTON

When the option is activated, the machine will stop full of water at the end of

the last rinse.

To finish the programme with the spin cycle, press button again to release it.

. 1/2 LOAD BUTTON

The water load for a small wash may be reduced by pressing the ( ) load

button. This saves water, detergent and electricity. The amount of detergent

used should be reduced in proportion to the load.

IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN

WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.

. ON/OFF PILOT LIGHT

. ON/OFF BUTTON

USE OF THE SELECTION CONTROLS

. PROGRAMME SELECTOR KNOB

This control allows you to select the washing programmes.

ALWAYS ROTATE the control in a clockwise direction, never

in an anticlockwise direction. Do not press the “on” button

(H) before selecting the programme

If you wish to modify the position of the control or select

another programme once a cycle has commenced, press

the Start/Stop key. Press again to recommence once the

modification has been completed.

. TEMPERATURE SELECTOR KNOB

This control allows you to select the temperature of your wash.

If you wish to carry out a cold wash, turn the knob until the

cold symbol coincides with the selector mark.

THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.

Do not exceed the maximum temperature recommended for

each cycle in the table of programmes.