M-Audio HyperControl HyperControl for Pro Tools онлайн [8/23] 18682

HyperControl for Pro Tools

Axiom Pro

4. Flip Button

– Axiom Pro can operate in two different modes when using HyperControl: Mixer Mode and Instrument

Mode. The functionality of the Flip button varies depending on the mode that you are in (the “F1” F-Key selects the mode;

see the “F-Keys” section below for more information).

Mixer Mode:

When Axiom Pro is in Mixer Mode, the ﬂip button determines the function of the Slider buttons

. By default, the

Slider buttons select channels within your Pro Tools session. However, pressing the Flip button

lets you step

through the other functions that the Slider buttons can perform (i.e., record arm, mute, solo). When you press the

Flip button, the functionality of the Slider Buttons is listed near the lower-left side of the screen.

Insert / Instrument Modes:

When Axiom Pro is in Instrument Mode or when an Insert is selected within Pro Tools, the Axiom Pro Sliders

control Pro Tools track volume settings whereas the Encoder knobs

control the parameters of your selected insert

plug-in or virtual instrument. The Flip Button can be used to exchange (or “ﬂip”) the function of the Encoder knobs

and the Sliders. This lets you use the Axiom Pro Sliders to adjust insert or virtual instrument settings, while using the

Encoder knobs to set track levels.

Use this button to engage and disengage fader ﬂipping. When engaging this mode, “Flip Faders On” is displayed in

the lower-left side of the screen.

✓NOTE: Switching back to Mixer Mode will cancel Flip Faders mode.

5. Encoder Knobs – These knobs automatically map to the parameters of the Pro Tools tracks or virtual instrument controls

that are currently selected through Axiom Pro. The “Using Pro Tools with HyperControl” section of this guide describes

how you can select different kinds of track and instrument parameters for these knobs to control.

6. Soft-Keys – These four buttons correspond to the “Pages” displayed along the bottom of the LCD screen and let you

access various parameters of your Pro Tools tracks (i.e., volume, pan, and insert settings, send levels, etc.) and virtual

instrument settings. The “HyperControl Display and Soft-Keys” section covers these buttons in detail.

Only available on Axiom Pro 49/61.