Siemens TK 73001 Инструкция по эксплуатации онлайн [35/132] 75029

Siemens TK 73001 Инструкция по эксплуатации онлайн [35/132] 75029
31
deen
j 3 sec. + >
auto oFF aFter
Turn the knob 6 to enter the time span
after which the appliance should
automatically switch to “energy saving
mode” following drink preparation.
A time between 5 minutes and 8 hours can
be set.
j 3 sec. + >
Water FiLter
Beforeanewwaterlterisused,itmustbe
rinsed.
Todothis,placethewaterlterrmlyinto
the water tank 11 with the aid of the
measuring spoon 14. Fill the water tank
with water up to the “max” mark.
Turn the knob 6 to select start and
press the
start
button 8.
●PLace 0.5 L container unDer MiLk
Frother
start
Place a container with a capacity of 0.5
litres under the milk frother 10.
Press the
start
button 8. Water will now
owthroughtheltertorinseit.
Next, empty the container. The appliance
is ready to use once more.
Note: Rinsingtheltersimultaneously
activatesthesettingforthe“changelter”
display.
Youcannddetailedinformationaboutthe
waterlterintheenclosedlterinstructions.
Thelterisnolongereffectivewhenthe
change FiLter display appears, or at the
latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance).
Replacementlterscanbeobtainedfrom
retailers (TZ70003) or from customer
service(467873).Ifnonewlteris used,
turn the Water FiLter setting to no.
Note: If the appliance has not been used
for a prolonged period (e.g. vacation) the
ltershouldberinsedbeforetheappliance
is used again. To do this, simply dispense a
cup of hot water.
j 3 sec. + >
contrast
The display 5 contrast can be set from –20
to +20. The factory setting is +0.
Enter the required setting with the knob 6.
j 3 sec. + >
Factory settings
You can cancel your own settings and
reactivate the factory settings.
To activate the factory settings, press the
start
button 8.
Note: The appliance can also be reset to
the factory settings using a combination of
buttons. The appliance must be switched off
fully.
Hold down the < and > buttons 4 and
the on/off switch 1 O / I at the same time
for at least 5 seconds. Press the
start
button 8 The factory settings are now
reactivated.

Содержание