Midea MO11M-24HN1 Сервис мануал онлайн [33/55] 624614

DM12-01.01.09en Oasis On-off

Service manual 33

2. Refrigerant charging

Procedure:

1). Connect the charge hose to the charging cylinder, open the 2-way valve and the 3-way valve

Connect the charge hose which you disconnected from the vacuum pump to the valve at the bottom of

the cylinder. If the refrigerant is R410A, make the cylinder bottom up to ensure liquid charge.

2). Purge the air from the charge hose

Open the valve at the bottom of the cylinder and press the check valve on the charge set to purge the

air (be careful of the liquid refrigerant).

3) Put the charging cylinder onto the electronic scale and record the weight.

4). Open the valves (Low side) on the charge set and charge the system with liquid refrigerant

If the system cannot be charge with the specified amount of refrigerant, or can be charged with a little at

a time (approximately 150g each time) , operating the air conditioner in the cooling cycle; however, one

time is not sufficient, wait approximately 1 minute and then repeat the procedure.

5).When the electronic scale displays the proper weight, disconnect the charge hose from the 3-way

valve’s service port immediately

If the system has been charged with liquid refrigerant while operating the air conditioner, turn off the air

conditioner before disconnecting the hose.

6). Mounted the valve stem caps and the service port

Electronic scale