Home
Главная
Brayer
Кофеварка
BR1108
Инструкция по эксплуатации Страница: 12

Brayer BR1108 Инструкция по эксплуатации онлайн [12/80] 625010

MAKING CAPPUCCINO

ATTENTION! When making cappuccino be careful to

avoid burns by outgoing hot steam.

• Make sure that the removable tray (1) and the tray grid

(2) are installed to their places.

• Fill the tank (13) with cold water, do not exceed the

maximal level mark, install the tank (13) back to its

place.

• Take the container (18), pull it towards yourself and

remove it (pic. 1), remove the cappuccinator lid (16)

from the container (18).

• Fill the container (18) with milk, do not exceed the

maximal level mark.

• Install the cappuccinator lid (16) on the container (18)

and install the cappuccinator back to the installation

place until the lock clicking.

• Install one of the co󰀨ee lters (21 or 22) into the lter

holder (20) matching the ledge on the lter (19 or 20)

with the hole on the holder (20) and turn the lter (21 or

22) counter/clockwise.

• Add the required amount of ground co󰀨ee into the lter

(21 or 22) with a measuring spoon (23) and slightly

tamp the co󰀨ee in the lter (21 or 22) with the back side

of the measuring spoon (23) (pic. 5, 6, 7).

• Install the lter holder (20) into the installation place «

» and turn the handle (4) to the right as far as it will

go «

» (pic. 2, 3, 4).

• Place a cup of suitable height and capacity on the grid

(2) (see the table «CHOOSING THE APPROPRIATE

CUP»).

Note: During preliminary heating, you can warm up the

cups that will be used for making co󰀨ee by placing them on

the tray (6).

• Direct the cappuccinator pipe (15) into the cup using

the cappuccinator pipe angle adjustment bar (14), if

necessary, change the length of the cappuccinator pipe

(15) (g. 9).

• Turn the frothed milk supply (intensity) control knob (17)

to the right (in this position it produces more frothed

milk). Turn the frothed milk supply (intensity) control knob

(17) to the left (in this position it produces less frothed

milk) (pic. 10, 11).

Notes: you can adjust the milk foam supply intensity when

making cappuccino.

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by setting the power switch

(11) «0/I» to the position «I», the indicator (7, 8, 9) will

light up and start ashing.

• When the co󰀨ee maker is ready for operation, the light

indicator (7, 8, 9) will glow constantly.

• To make one cup of cappuccino use a small lter (21)

and press the «Cappuccino»-button (8) once; the light

indicator «

» will light up.

Brayer BR1108 Инструкция по эксплуатации онлайн [12/80] 625010

Содержание

Похожие устройства