Brayer BR1500 Инструкция по эксплуатации онлайн [8/44] 625113

Brayer BR1500 Инструкция по эксплуатации онлайн [8/44] 625113
8
EN
ATTENTION!
Before installing the attachments, make sure that
the power plug is not connected to an electrical
outlet and that the operation mode switch knob (2)
is set to the «0» position.
The continuous operation should not exceed 5-6
minutes, take a break for at least 10-15 minutes
after two operation cycles.
To activate the kitchen machine turn the operation
mode switch knob (2) clockwise and set the required
attachment rotation speed.
You can add the required ingredients during the
operation through the opening (10) in the lid (9).
To activate the kitchen machine for a short time
turn the operation mode switch knob (2) to the «P»
position and hold it. To turn the kitchen machine o󰀨
release the knob (2).
Upon completion set the operation mode switch knob
(2) to the «0» position and disconnect the power plug
from the electrical outlet.
Hold the motor unit (1) with your hand, push the lock
lever (3) upwards, the motor unit (1) will be xed in
the upper position.
Remove the installed attachment by turning it
clockwise (g. 4).
Turn the lid (9) and remove it (g. 2).
Remove the bowl (6) by turning it counterclockwise to
the «OPEN» position.
Remove food from the bowl (6).
Wash the used attachment and the bowl (6) with
warm water and a neutral detergent, rinse and dry.
CLEANING AND MAINTENANCE
After using the kitchen machine, turn it o󰀨 by turning
the operation mode switch knob (2) to the «0»
position and disconnect the power plug from the
electrical outlet.
USING THE KITCHEN MACHINE
Hold the motor unit (1) with your hand and push the
lock lever (3) upwards, the motor unit (1) will be xed
in the upper position.
Set the bowl lid (9) in its installation place (4) (g. 1).
Turn the lid (9) to x it (g. 2).
Set the bowl (6) in its installation place (7) and turn it
clockwise to the «LOCK» position until tight.
Install one of the attachments (11, 12 or 13) on the
shaft (5), to do this, slightly press the attachment
upwards and turn it counterclockwise until tight (g.
3, 4). Make sure that the attachment is properly xed.
Place the required ingredients in the bowl (6).
Press the lock lever (3) and hold it, press the upper
part of the motor unit (1), lower it to the operation
position and release the lever (3). Make sure that
the motor unit (1) is securely xed in the operation
position.
Connect the power plug into the mains socket.

Содержание

Скачать
Случайные обсуждения

Ответы 0

из какого материала шестерни?
2 года назад