Home
Главная
Brayer
Отпариватель
BR4124
Инструкция по эксплуатации Страница: 8

Brayer BR4124 Инструкция по эксплуатации онлайн [8/40] 625154

• Make sure that there is water in the water tank (1),

ll the water tank (1) if necessary.

• Place the garment steamer on the base on a at and

steady surface.

• Make sure that the steam supply button (4) is set to

the «

» position.

• Connect the power plug (3) to the mains socket. Wait

for some time (from 3 to 5 minutes) necessary for

normal generation of steam.

• Take the garment steamer by the handle (7) on the

same level with the steam supply on button (4).

• Hang the clothes on a hanger.

Note: never steam clothes on a person as the outgoing

steam temperature is very high, use a hanger only.

• To turn steam supply on press and hold the button (4)

in the «

» position.

• To switch the steam supply o󰀨 release the button (4).

• Continuous steam supply is carried out by setting the

steam supply button (4) to the «

» position.

• For maximum steam supply press and hold the lower

part of the «

» button (4).

• Slowly move the brush attachment (8) along the

fabric, smooth out the fabric with your free hand.

Notes:

- during operation, hold the garment steamer

vertically and do not turn it over;

- during the garment steamer operation the upper

part of the body (6) becomes very hot. Be careful

and do not touch hot parts of the unit body (6) and

the operating surface (5);

- after steaming the clothes may need some time to

dry, leave them on the hanger.

• After the unit operation, remove the power plug (3)

from the mains socket and let the garment steamer

cool down.

• Detach the brush attachment (8).

• Remove the water tank (1) and pour out the

remaining water, install the water tank (1) back to its

place.

CLEANING AND CARE

• Disconnect the power plug (3) from the mains socket

and wait until the garment steamer cools down

completely.

• Remove the water tank (1) and pour out the

remaining water, install the water tank (1) back to its

place.

• Clean the garment steamer body (6) and the

operating surface with the steam release openings

(5) with a slightly damp cloth, and then wipe dry.

• You can remove the mineral deposit from the

operating surface (5) with a cloth soaked in vinegar-

water solution.

• Remove the brush attachment (8) and wash it under

a water jet.

Brayer BR4124 Инструкция по эксплуатации онлайн [8/40] 625154

Содержание

Похожие устройства