Home
Главная
Brayer
Утюг
BR4000VT
Инструкция по эксплуатации Страница: 11

Brayer BR4000VT Инструкция по эксплуатации онлайн [11/52] 625156

iron will switch o󰀨 and the indicator on the control/

indication panel (6) will be ashing yellow.

To resume ironing, set the iron from horizontal position

to vertical or vice versa, wait until the iron soleplate (11)

heats up and continue ironing.

STEAM CHAMBER CLEANING

• Regularly clean the steam chamber of the iron,

especially in the regions with «hard» tap water.

• Set the continuous steam supply knob (3) to the

position «

» (steam supply is o󰀨) (pic. 1).

• Open the lid (2), ll the tank with water up to the

maximal mark «max» and close the lid (2) (pic. 2).

• Place the iron on its base (9).

• Insert the power plug into the mains socket, the

yellow indicator « » will light up on the panel (6) and

the iron will switch on in the standby mode.

• Press the button «TEMP» on the control panel (6)

to set the required temperature of the soleplate (11)

«max». The ashing of a red indicator on the control

panel (6) will conrm the set temperature (see the

table of temperature and indicator colors).

• When the iron soleplate (11) reaches the set

temperature, the temperature indicator on the control/

indication panel (6) will glow constantly, and you can

cleaning the steam chamber of the iron.

• Remove the power plug from the mains socket.

• Hold the iron above the sink horizontally, press and

hold down the button (13) « » (pic. 6).

• Boiling water and steam with scale will be intensively

released from the soleplate (11) openings.

• Slightly sway the iron back and forth, until all the water

leaves the water tank (10).

• Place the iron on its base (9) and let the soleplate (11)

cool down completely.

• After the soleplate (11) cools down, wipe it with a dry

cloth.

• Before taking the iron away for storage make sure that

the water tank (10) is empty, andthe iron soleplate (11)

is dry.

CLEANING AND MAINTENANCE

• Before cleaning make sure that the iron is switched o󰀨

and cold and the power plug is not connected to the

mains socket.

• Open the water inlet lid (2), turn over the iron and drain

any remaining water (pic. 7).

• Wipe the iron body with a slightly damp cloth and then

wipe it dry.

• You can remove the mineral deposit from the iron

soleplate (11) with a cloth soaked in table vinegar.

• •After removing the mineral deposit polish the soleplate

(11) surface with a dry clean cloth.

• Do not use abrasives or solvents to clean the iron

soleplate (11) and body.

• Avoid contact of the iron soleplate (11) with sharp metal

objects, as well as with metal buttons, zippers etc.

• Do not immerse the iron, the power cord and the power

plug into water or any other liquids.

Brayer BR4000VT Инструкция по эксплуатации онлайн [11/52] 625156

Содержание

Похожие устройства