Home
Главная
Brayer
Утюг
BR4000VT
Инструкция по эксплуатации Страница: 7

Brayer BR4000VT Инструкция по эксплуатации онлайн [7/52] 625156

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using.

• Unpack the iron and remove any packaging materials

and advertising stickers.

• If there is a protective lm on the soleplate (11),

remove it.

• There may be water residue in the tank (10), as the

iron has undergone factory quality control.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power

supply voltage of the unit correspond to the

specications of your mains. When using the unit in

the mains with 60 Hz frequency, the unit does not

need any additional settings.

• Clean the iron body and the soleplate with a soft,

slightly damp cloth and then wipe it dry.

WATER SELECTION

• Use tap water to ll the water tank (10) of the iron.

• Anti-calc function softens water in order to decrease

the mineral deposit in the steam chamber, but we

recommend to ll the tank with water additionaly cleaned

with domestic lters.

• If tap water is hard, it is recommended to mix it with

distilled water in proportion 1:1. If tap water is too hard,

mix it with distilled water in proportion 1:2 or use distilled

water only.

FILLING THE WATER TANK

ATTENTION!

Before lling the water tank (10) with water make sure

that the iron is switched o󰀨 and unplugged.

• Set the continuous steam supply knob (3) to the position

»(pic. 1).

• Open the water inlet lid (2).

• Pour the water into the water tank using the beaker (13)

and then close the lid (2) (pic. 2).

Notes:

– do not let water go over the «max» mark when lling the

water tank (10);

– if you need to rell the water tank during ironing, switch

the iron o󰀨 and remove the power plug from the mains

socket.

IRONING TEMPERATURE

Before using the iron for the rst time test the heated iron

on a piece of cloth to be sure that the iron soleplate (11)

and the water tank (10) are clean.

Brayer BR4000VT Инструкция по эксплуатации онлайн [7/52] 625156

Содержание

Похожие устройства