Timberk T-WSS80-FS40D-V Инструкция по эксплуатации онлайн [27/60] 635881

IM2021

2.5. Set the thermostat knob to the " COMFORT " position you choose the most

comfortable water heating temperature +58 °C (±2 °C). This will allow you to use

electricity more efficiently.

3.Turn off

To turn off the water heater, turn the thermostat knob to the left-most “OFF” position

and unplug or disconnect the appliance from the power main.

WARNING!

Water may drip from the drain pipe of the pressure relief device, this pipe must remain

unblocked. Water dripping cannot be avoided and must not be prevented as blocking

the valve can cause a rupture of the internal tank.

9. MAINTENANCE

Fig 5 Fig 6

1. Check the electric plug and socket as often as possible. Ensure proper electrical

contact and proper grounding. The plug and socket should not become excessively

hot.

2. If the water heater is not used for a long time, especially in regions with low air

temperatures (below 0 °C), water must be drained from the heater to prevent damage

to the product (to prevent water from freezing in the internal tank).

WARNING!

The manufacturer treats ay damage to the water heater done by water freezing in the

internal tank as a non-warranty case.

3. To ensure long-term reliable operation of the water heater and to maintain the

manufacturer’s warranty, the internal tank must be periodically cleaned, and deposits

must be removed from the heating element. Furthermore, the condition of the

magnesium anode must be checked (degree of breakdown) in order to have it replaced

with a new one in case of complete breakdown. Tank cleaning frequency depends on

the hardness of water in the area.