Scarlett SCA H VER33 1000 Инструкция по эксплуатации онлайн [20/45] 646381

IM2022

Turn the thermostat knob clockwise until it stops. When the room temperature reaches

the desired level, turn the thermostat knob counterclockwise until the appliance is

switched off, and you will hear the click. The thermostat will maintain the set

temperature, periodically turning on and off the convector.

In cold weather, the convector may not fully cope with the heating of the room. In this

case, set the thermostat knob to a level slightly higher than desired.

Switching off

Set the keys of the heating power mode switch to the "0" position and disconnect the

appliance from the electrical network.

9. CLEANING AND MAINTENANCE OF THE UNIT

The external body of the device must be regularly cleaned from dust and dirt, because

this affects the efficiency of its work.

Before cleaning, turn off the device and unplug it from the network, let it cool, then wipe

its body with a soft, slightly damp cloth. Then wipe it dry and allow the device to dry

completely. It is not recommended to use detergents, including detergents with

abrasive compounds to clean the body of the device. Do not damage the appliance

with sharp objects, because scratches on paint can cause rust.

The rear side of the convector must also be periodically cleaned from dust and dirt. To

do this, disconnect the device from the brackets, and after cleaning, put it back on the

brackets.

Cleaning should be carried out periodically to maintain the technical condition of the

convector and preserve its appearance for many years.

NOTE:

A change in the color of enamel on the front side is not a defect, but is a consequence

of operation of the device in a room with a big amount of dust particles and other

contaminants in the air.

10. STORAGE

Make sure that the appliance body and its heating element have cooled down before

the appliance is dismantled and packed in its packaging for long-term storage.

Complete all requirements of chapter CLEAN AND CARE.

Reel on the power cord.

When the device is not in use for a long time, store it in a cool, dry place in the original

cardboard box.