Hyundai H-HU4.4-U10E Инструкция по эксплуатации онлайн [14/28] 646394

IM2021

 Do not hit or throw the water tank. It may get damaged resulting in water leaks. Do not use

the unit in case if the water tank is heavily hit. Immediately contact the technical support

service or the maintenance and repair station.

 Every day fill the tank with fresh filtered water and keep the unit clean.

8. OPERATION OF THE DEVICE

Switching on

Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the

device to the power line. Press the touch control button once, and steam will start coming from

the atomizer. At the very beginning of operation, the atomizing level may appear unstable, which

is caused by the temperature difference and water quality. It will take a short period time for this

process to stabilize.

Color illuminated

During the operation of the device, the water tank will be illuminated, and the colors will change

alternately.

Adjusting steam outlet intensity

Adjusting steam outlet intensity is possible by pressing the touch control button. The device has

the following steam intensity modes: 1/2/3.

Comfortable conditions are reached at 40 to 60% relative air humidity. You can yourself

determine the comfortable humidity level or use a special device called a hygrometer (not

included in the set), measuring the relative humidity level.

Automatic switching off when there is no water

When water level in the tank drops below minimal level, the ultrasonic membrane will

automatically switch off and the red indicator will light up on the control panel. To continue

operation of the appliance it is necessary to fill the tank with water according to «Filling the water

tank» paragraph, and then connect the appliance to the electric mains.

SLEEP mode

To activate SLEEP mode, hold the touch control button for 2 seconds. Backlight will turn off.

9. Switching off

To turn off the device, press the touch control panel once.

10. ATTENTION!

If a large amount of condensate is generated on the upper part of the appliance when it is

operating, then you need to decrease the steam outlet intensity.

11. CLEANING AND MAINTENANCE

 Before cleaning the appliance, make sure it is unplugged. Otherwise, it may result in electric

shock.

 Before cleaning, in order not to burn your hands, wait until the water in the base of the

appliance has completely cooled.

 Use a damp and soft cloth to wipe the outside of the appliance.