Vitesse VS-694 Руководство по эксплуатации онлайн [5/14] 29873

USING THE UNIT

PRODUCT INSTALLATION

1. Unpack the machine and stretch the power cord.

2. Take out the support pole, (as

shown in picture), pull out the Pole 3, screw it counter

clockwise into Pole 2, and screw out the Pole 1 counter

clockwise, stretch it thoroughly and screw it clockwise

into Pole 2. Note: (as shown in the right picture) this

action is wrong. Do not screw the black snap close. Do

not install like this. The four poles shall be assembled

the same.

3. Insert the assembled support pole into the hole on the machine body until it

reaches the bottom. Screw clockwise the snap close of the hole to fasten the

support pole.

4. Insert the hanger into the top of support pole, screw it to the designed height

and then screw the fixing snap close beneath it to fasten it (as shown in Picture

1). Spread the hanger and screw the adjusting snap close beneath it to reach

a designed range (as shown in Picture 2). (Choose the height as required)

P/7 P/8

5. Insert the hook for ironing brush

into the top of support pole and

tighten it.

6. Take out the cap of connecting hole, take care of it and

install it after using.

(NOTE: The cap could prevent the water and dust into

the connector).

7. Take out the ironing brush, align the plug of ironing

brush with and insert it into the corresponding hole on

machine body, and tighten it clockwise.

8. If required, take out the fur brush, align the two clasps of fur brush with and

grip them into the snap close at the bottom of ironing brush, and then grip the

bottom clasp into the snap close at the top of ironing brush. The pants clip

shall be installed the same. The dismounting is in a reverse order.

9. Hang the ironing brush on the hook for it.

Note: The dismounting is in a reverse order. (Put the

machine body and all accessories in safe place during

installation and dismounting.)

www.vitesse.ru