Timberk T-HU3.5-A15E-W Руководство по эксплуатации онлайн [20/44] 635834

IM2021

mode; if the current level of relative humidity in the room is ≥61%, the humidifier will

operate in low evaporation rate mode.

To disable this mode, you need to press the button again, the AUTO symbol will go out

on the display, and the device will return to the previous operating mode.

Night Mode

To turn off the display backlight, press the button , to turn on the backlight, press

the button again.

Function is "PLASMA".

Press the button to activate the "PLASMA" function. In this mode, the ionization

function is activated to saturate the air with aeroions, which help to strengthen the

nervous and circulatory systems, improve lung activity and protect against respiratory

diseases.

Switching off

Press the button to turn off the device. Unplug the power cord.

6. CLEANING AND MAINTENANCE

 Before cleaning the appliance, make sure it is unplugged. Otherwise, it may result

in electric shock.

 Before cleaning, in order not to burn your hands, wait until the water in the base of

the appliance has completely cooled.

 Use a damp and soft cloth to wipe the outside of the appliance.

 To avoid electric shock, do not scratch or damage the components of the device

when cleaning.

 Do not use solvent, gasoline, dimethylbenzene, hard brush, talcum powder and

other substances when cleaning the device.

 Wipe off any remaining water inside the base of the unit under the tank with a

damp and soft cloth.

 To remove water on small parts, you can use a brush and then wipe them again

with a soft cloth.

 Clean the device once or twice a week.

 If dirt is formed on the membrane, clean it with a brush.

 Rinse the water tank cover and nozzle carefully and effortlessly with fresh water,

otherwise this will cause water to leak through the cover.

 After removing any remaining water from the surface of nozzle, wipe it with a soft

cloth.

 Clean the outside of the appliance with a damp and soft cloth.