Главная
Skipped breadcrumb items
KCH1202
Инструкция по эксплуатации Страница: 7

Главная
Kress
KCH1202
Инструкция по эксплуатации Страница: 7

Kress KCH1202 — рекомендации по зарядке и обслуживанию аккумуляторных батарей [7/16]

Превью страниц Страница 7 / 16

Kress KCH1202 Инструкция по эксплуатации онлайн [7/16] 669340

will be green and ash).If the battery pack is not repaired

after 30 minutes, the light will remain red which means that

the battery is dead.

NOTE: Repaired battery packs are still usable but should

not be expected to perform as much work as new battery

packs.

IMPORTANT CHARGING NOTES:

1. For a new battery or a battery that has been in storage

for sometime, please recharge the battery before use.

If you want to store the battery for a long time, please

fully charge the battery pack to ensure maximum

battery life.

2. Longer life and better performance can be obtained if

the battery pack is charged when the air temperature

is between 18

C and 24

C. Do not charge the battery

pack in air temperatures below 0

C, or above 40

This is important as it can prevent serious damage to

the battery pack.

3. Never freeze your charger or immerse charger in water

or any other liquid.

4. When the battery pack fails to produce sufcient

power on jobs that were previously done easily, please

recharge you battery, do not continue to use under

this condition. You may charge a partially used pack

whenever you desire with no adverse affect on the

battery pack.

5. When charging it is normal that the charger and battery

pack may become warm to touch.

6. If the battery pack does not charge properly:

a. Check current at power outlet by plugging in another

appliance.

b. Plug and unplug to check whether the charger is ok

c. Check whether the battery has been damaged

d. Move the charger and battery pack to a location where

the surrounding air temperature is approximately 18

-24

e. If the charging problem persists, take the tool, battery

pack and charger to an authorized service center.

f. Under certain conditions, when the charger is plugged

into the power supply, the exposed charging contacts

inside the charger can be shorted by foreign material.

Foreign materials of a conductive nature such as

metallic particles should be kept away from charger

cavities. Always unplug the charger from the power

supply when there is no battery pack in the charger or

before attempting to clean.

4. TO REMOVE OR INSTALL BATTERY PACK

Locate latches on side of battery pack and depress both

sides to release battery pack from your tool. Remove battery

pack from your tool. After recharge insert the battery pack

into the battery port. A simple push and slight pressure will

be sufcient.

PROBLEM SOLUTION

I CANNOT FIT THE BATTERY INTO THE BATTERY

CHARGER. WHY?

a) Check if the charger and the battery pack are

specically designed for working together.

b) The battery can be inserted into the charger only in

one direction. Turn the battery around until it can be

inserted into the slot, the indicator light should be green

and ash when the battery is charging.

REASONS FOR DIFFERENT CHARGING TIMES

The charging time can be affected by many reasons which

are not defects in your product.

a) If the battery pack is only partly discharged it may be

re-charged in less than 1 hour.

b) If the battery pack and ambient temperature are very

Kress KCH1202 — рекомендации по зарядке и обслуживанию аккумуляторных батарей [7/16]

Содержание

Похожие устройства