Sinbo SK-7310 Инструкция по эксплуатации онлайн [6/42] 83374

- 5 -

19. The appliance contains no user-serviceable parts. This appliance is intended to be

used in household and similar applications such as: staff kitchen areas in shops, offices

and other working environments; farm houses; by clients in hotels, motels and other

residential type environments; bed and breakfast type environments.

PREPARATION FOR USE

1. Remove all packing from the kettle and its power base. Before using the kettle for the

first time, r if it has been out of use for a long time fill to the max mark and boil, then

discard the boiled water and rinse the kettle out with cold water.

2. Before connecting the appliance to the mains supply check that the voltage indicated

on the rating plate corresponds with the mains voltage in your home.

INSTRUCTIONS FOR USE

1. Always remove the kettle from the power base before filling.

2. Lift the lid.

3. Fill the kettle between the MIN and MAX marks on the water level indicator with cold

water.

4. Replace the lid and place the kettle back on the power base. Make sure the lid is

securely fitted on the kettle before boiling.

5. Position the kettle on the power base.

6. Plug the power base into the power outlet and switch on at the mains.

7. To start boiling press the ON/OFF switch to the down position.

8. The power indicator will illuminate and the kettle will start to boil. NEVER REMOVE

THE LID DURING BOILING.

9. When the water has boiled the kettle will switch off automatically and the power

indicator will extinguish.

10. You can stop the boiling process at any time by pressing the switch to the OFF position.

11. After the kettle has switched off automatically, there may be a short delay before it

can be re-boiled. This is usually no more than 20 seconds.

12. The safety cut-out will operate if you accidently switch on the kettle when it is empty

or allow it to boil dry Wait 15 minutes for the cut-out to reset before refilling with cold

water and boiling.

CLEANING

1. Always unplug the kettle from the mains supply and allow to cool down completely

before storing or cleaning.

2. Never immerse any part of the power cable, plug, power base or kettle in water or any

other liquid.

3. Wipe the exterior of the kettle using a damp cloth. Dry thoroughly. Never use harsh

chemicals or abrasive cleaning agents as these may damage the finish of your kettle.

4. Over a period of time lime scale can build up inside your kettle. To remove lime scale