FERM OTM1012 без акк. и зу. Инструкция по эксплуатации онлайн [6/36] 672791
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

FERM OTM1012 без акк. и зу. Инструкция по эксплуатации онлайн [6/36] 672791

FERM OTM1012 без акк. и зу. Инструкция по эксплуатации онлайн [6/36] 672791
6
EN
5) Battery tool use and care
a) Recharge only with the charger specied by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of re when used with another battery pack.
b) Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and
re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modied. Damaged or modied
batteries may exhibit unpredictable behaviour
resulting in re, explosion or risk of injury.
f) Do not expose a battery pack or tool to
re or excessive temperature. Exposure to
re or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C“
can be replaced by the temperature „265 °F“.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specied in the
instructions. Charging improperly or at
temperatures outside the specied range may
damage the battery and increase the risk of re.
6) Service
a) Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
Additional safety warnings for multitools
Contact with or inhalation of dust coming
free during use (e.g. lead-painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask. Always
use proper dust extraction during use.
• Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
• Do not work metal with a magnesium content
of more than 80%.
• Be very careful when working painted
surfaces.
• Do not use accessories which are not
specifically designed and recommended by
the manufacturer. Risk of personal injury.
• Inspect the machine and the accessories
before each use. Do not use accessories
which are bent, cracked, or otherwise
damaged. If the machine or one of the
accessories is dropped, inspect the machine
or the accessory for damage. If necessary,
replace the accessory.
• Only use accessories that are recommended
by the manufacturer.
• Only use accessories that are suitable for the
application.
• Only use accessories with the correct
dimensions.
• Do not use accessories that require liquid
coolants. Risk of electric shock.
• Make sure that the accessories are properly
mounted. Do not use adapters or other aids
to mount accessories with another spindle
diameter.
• Make sure that the maximum speed for the
accessory is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• Let the machine run at no load in a safe area
after mounting the accessories. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
• Make sure that the workpiece is properly
supported or fixed.
• Wear safety goggles. Wear hearing protection.
Wear a dust mask. If necessary, use other
protective means, such as safety gloves,

Содержание

Похожие устройства

Скачать