Sinbo SSI-2869 Инструкция по эксплуатации онлайн [10/50] 84059

- 9 -

Simple Repair Methods

Problem Possible Reasons Measurement

Not enough heat or Too

heat

Rotate thermostat dial improperly

or unplugging

Correct Thermostat dial in position

and check if the iron is plugged.

No steam or Leakage The thermostat dial has been set to

MIN

Set the thermostat dial to the

required position.

No burst of steam or no

vertical steam

The (vertical) burst of steam

function has been used too often

within a very short period. The iron

is not hot enough

Continue ironing in horizontal

position and wait a while before

using the (vertical) burst of steam

function again

Leaking water from

Soleplate

Set the thermostat dial out of steam

range.

Set the thermostat dial as per steam

range.

The heat is still not enough. Open steam control button only after

the indicator light goes off.

The water is over than max position

Pour out the remaining water

Little Steam

Check if the steam control button

is in proper location.

Set the steam control button to the

proper location.

Steam hole is blocked. Clean hole with distilled water.

Too little water in the water tank Fill water into the box

No Spraying No enough pressure or air inside Press the spray nozzle by hand,

and push the spray button several

times continuously.