Sinbo SVC-3475 Инструкция по эксплуатации онлайн [14/70] 84068

- 13 -

4.Carry away the dust-glass cap and Spill rubbish

5.Replace the dust compartment subassembly until it is locked.

2. Cleaning and changing HEPA

* HEPA for air-inlet/air outlet should be cleaned at least twice a year or when it becomes visible

solid.

* Clean HEPA for air-inlet/air outlet when you find it is filled in.

* HEPA for air-inlet/air outlet and filter for air-outlet are changed.

* Always operate the cleaner with air-inlet/air outlet installed.

* Otherwise, reduced suction or motor damage may be result.

* Disconnect from electrical outlet, before cleaning filter.

* Do not use a washing machine to rinse filter.

* Do not use hair drier to dry it.

3. Cleaning and changing air-inlet HEPA

(1) After opening the dust-glass cap subassembly, take out air inlet HEPA

(2) Remove HEPA bracket.

(3) Remove HEPA from the bracket.

(4) Rinse bracket and HEPA in lukewarm water and dry Filter and HEPA completely.

(HEPA is rinsed by brush.)

(5) Put the HEPA into the bracket or change new HEPA, then put them back.

4. Changing air outlet HEPA

(1) Open the grille for air-outlet.

(2) When open the grille for air-outlet, the filter for air-outlet is found.