Sinbo SFH-3367 Инструкция по эксплуатации онлайн [8/38] 84155

- 7 -

than 200mm is forbidden, between the ceiling less than 500mm is forbidden. So that the

air around can convect effectively, and heat up evidently.

Pay more attention on the distance between the heater and objects, and it's forbidden

to install the heater under the socket. The heater has IPX4 Approval, all technology

submit to safety standard, and can install it in any room, also in bath room.

If install the heater in the bathroom, we suggest installing the heater in a place where

couldn't be touched once in bathtub or shower bath.

Fix the bracket and install the heater:

It should be level between the bracket axes and heater axes, drill two wholes with the

diameter 6mm on the wall, the distance should accord to the two wholes on the bracket,

and fix the bracket with plastic screw. (Try best to keep it level)

(Mark a sign around 305mm under the middle of bracket, and drill a whole on the wall,

then fix the bracket with the plastic screw, and make sure the heater don't touch the

wall directly.)

If don't use the heater, turn off the power switch, and if use the heater, turn on the power

switch, and the corresponding indicate light on; Turn the knob control temperature in

clockwise way, the temperature rises up, and if in anticlockwise way, the temperature

goes down.

If turn off the heater, please use the power switch. Make sure that the temperature

control couldn't be regarded as the main switch.

Power selection:

You can select the Power and Negative Ion function as you wished:

SFH 3365: 500W (min) - 1000W (max)

SFH 3366: 800W (min) - 1600W (max)

SFH 3367: 950W (min) - 1900W (max)

The heater have the automatic temperature control, and if using at un-usual temperature,

the heater will cut off the power automatically, and if the temperature drop down, the

heater working again.

Temperature Adjustment:

Once using, please turn the temperature control knob to the max.

position in clockwise, then the room temperature will rise gradually.

Once the room temperature reached as you wished, please turn the temperature control

knob in anti-clockwise, till you head slight ticktack once. And this moment the heater

stop working, the indicate light off.

The heater can keep on working till the room temperature reach the temperature set

advanced. And if the room temperature drop down, then it work again.(It can work in

cycle and keep the comfortable room temperature)