Home
Главная
Град-М
Шлифовальная Машина
УШМ-750
Инструкция по эксплуатации Страница: 10

Град-М УШМ-750 Инструкция по эксплуатации онлайн [10/22] 84224

3) Personal safety

a. Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use

a power tool while you are tired or under the inﬂ uence

of drugs, alcohol or medication. A moment of inatten-

tion while operating power tools may result in serious

personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for appro-

priate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the

off position before plugging in. Carrying power tools

with your ﬁ nger on the switch or plugging in power tools

that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

f. Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes jewellery or long hair can

be caught in moving parts.

g. If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used. Use of these devices can

reduce dust related hazards.

h. Use clamps or a vice to hold work. It’s safer than us-

ing your hand and it frees both hands to operate tool.

4) Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do

the job better and safer at the rate for which it was de-

signed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that can not be controlled

with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools opera-

tion. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained

power tools.

f. Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking into

account the working conditions and the work to be per-

formed. Use of the power tool for operations different

from intended could result in hazardous situation.

5) Service

a. Have your power tool serviced by a qualiﬁ ed repair

person using only identical replacement parts. This will

insure that the safety of the power tool is maintained.

SAFETY RULES FOR ANGLE GRINDERS

ACCESSORIES

• Use the original accessories which can be obtained

from your dealer

• For mounting/using non- accessories observe the in-

structions of the manufacturer concerned

• Use only accessories with an allowable speed match-

ing at least the highest no-load speed of the tool

• Do not use damaged, deformed or vibrating grinding/

cutting discs

• Handle and store grinding/cutting discs carefully to

avoid chipping and cracking

• Protect accessories from impact, shock and grease

• Do not use a grinding/cutting disc that is larger than

the maximum recommended size

• Only use grinding/cutting discs with a hole diameter

which ﬁ ts mounting ﬂ ange (7) without play; never use

reducers or adaptors to ﬁ t large-hole grinding/cutting

discs

• Never use grinding/cutting discs with a threaded

hole, of which the thread is not long enough to accept

the spindle length of the tool

• Never use accessories with a “blind” threaded hole

smaller than M14 x 21 mm

OUTDOOR USE

• Connect the tool via a fault current (FI) circuit breaker

with a triggering current of 30 mA maximum

• Only use an extension cord which is intended for

outdoor use and equipped with a splashproof coupling-

socket

BEFORE USE

• Before using the tool for the ﬁ rst time, it is recom-

mended to receive practical information

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• Take protective measures when during work dust can

develop that is harmful to one’s health, combustible or

explosive (some dusts are considered carcinogenic);

wear a dust mask and work with dust/chip extraction

when connectable

• Be careful of hidden electrical wires or gas- and water

pipes; check the work area, for instance with a metal

detector

• Be careful when cutting grooves, especially in sup-

porting walls (slots in supporting walls are subject to

country- speciﬁ c regulations; these regulations are to

be observed under all circumstances)

• Clamp the workpiece in case it does not remain

stationa ry from its own weight

• Do not clamp the tool in a vice

• Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

• Wear protective glasses and gloves, hearing protec-

tion and sturdy shoes; when necessary, also wear an

apron

• Always mount auxiliary handle (5) and protective

guard (6); never use the tool without them

• Be sure tool is switched off when plugging in

Град-М УШМ-750 Инструкция по эксплуатации онлайн [10/22] 84224

Содержание

Похожие устройства