Schaub Lorenz SLK GY6533 Инструкция по эксплуатации онлайн [36/46] 678118

Schaub Lorenz SLK GY6533 Инструкция по эксплуатации онлайн [36/46] 678118
EN - 12
I
J
Separator
Separator
F
HOB
B
D
E
T
C2
A
C
C1
H
G
Apply the supplied one-sided self-
adhesive sealing tape all the way
around the lower edge of the cooktop.
Do not stretch it.
Self-adhesive
sealing tape
Insert the appliance into the aperture
and fix in position using the brackets
(A) and screws (B). Adjust the position
of the brackets depending on the
thickness of the worktop and tighten the
screws evenly.
A
B
t
t>20 mm
Worktop
Hob
Important: If the appliance is to be
installed above a cupboard or drawer it
is absolutely essential that you place a
separator between the base of the
appliance and the drawer unit.
2.3 GaS ConneCtion
Assembly of gas supply and leakage
check
Connect the appliance in accordance
with applicable local and international
standards and regulations. First, check
what type of gas is installed on the cooker.
This information is available on a sticker
on the back of the cooker. You can find
the information related to appropriate gas
types and appropriate gas injectors in
the technical data table. Check that the
feeding gas pressure matches the values
on the technical data table, to be able to
get the most efficient use and to ensure the
minimum gas consumption. If the pressure
of used gas is different than the values
stated or is not stable in your area, it may
be necessary to assemble an available
pressure regulator on the gas inlet. You
should contact an authorised service centre
to make these adjustments.
Points that must be checked during
flexible hose assembly:
If the gas connection is made by a
flexible hose fixed onto the gas inlet of
the hob, it must be fixed on by a pipe
collar.
Connect your appliance with a short
and durable hose that is as close as
possible to the gas source.
The permitted maximum length of the

Содержание

Похожие устройства

Скачать