Festool Rutscher RS 200 Q 567764 Инструкция по эксплуатации онлайн [12/62] 8445

Festool Rutscher RS 200 Q 567764 Инструкция по эксплуатации онлайн [12/62] 8445
12
Unperforated abrasives can be perforated with
the „Lochfi x“ (accessory).
- Replace the Stickfi x sanding pad with a sanding
pad for abrasives for clamping,
- Secure an abrasive sheet in place using the
two clamping devices. Press the levers (1.12) to
release the clamping devices.
Once clamped in position, make sure the
abrasive paper is taut and sits fl at on the
sanding pad.
5.4 Auxiliary handle
The auxiliary handle (1.13) can be attached for
tasks where the front edge of the sanding pad
sands up to edges.
6 lnstructions on application
Never overload the tool by using too much pres-
sure! The best sanding results are achieved
when applying moderate pressure. The sanding
performance and quality depend mainly on the
choice of the right sanding material.
We recommend the following settings on the ro-
tary control (1.2) for electronic machines:
rotary control setting
- sanding work
5 - 6
- sanding with max. drive
- sanding old paint
- sanding wood and veneer prior to painting
- interim sanding of paint on surfaces
4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.
3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and
doors
- interim paint sanding on edges
- pre-sanding natural wood windows with sanding
vlies
- smoothing wood surfaces with sanding felt prior
to staining
- rubbing down stained surfaces with sanding
vlies
- rubbing down or removing excess lime paste with
sanding vlies
2 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with sand-
ing felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
Metalworking
The following precautions are to be taken
when processing metals for safety rea-
sons:
- Pre-connect a residual current circuit-breaker
(FI, PRCD).
- Connect the machine to a suitable dust extrac-
tor.
- Clean tool regularly of dust accumulations in the
motor housing.
Wear protective goggles.
7 Accessories
Use only original Festool accessories and Festool
consumable material designed for this machine
because these system components are designed
specifi cally for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under “www.festool.com”.
8 Maintenance and care
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
The cool air openings in the motor casing must
always be kept clean and unobstructed to ensure
air circulation.
All maintenance and repair work which requires
the motor casing to be opened may only be carried
out by an authorised service centre.
The tool is fi tted with special motor brushes with
an automatic cut-out. When the brushes become
worn the power supply is shut off automatically
and the tool comes to a standstill.

Похожие устройства

Скачать