Sony BRAVIA KDL-46S2030 Инструкция по эксплуатации онлайн [26/129] 87044

On Timer

Sets the timer to turn on the TV.

“Day”: Selects the day on which you want to activate the On Timer.

“Time”: Sets the time to turn on the TV.

“Duration”: Selects the time period after which the TV automatically switches to

standby mode again.

“Volume Set-up”: Sets the volume for when the timer turns on the TV.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital channels,

the clock cannot be adjusted manually since it is set to the time code of the

broadcasted signal.

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

When “Picture Off” is selected, the picture is switched off and the (Picture Off)

indicator on the TV (front) lights up in green. The sound remains unchanged.

Light Sensor

Automatically optimizes the picture settings according to the ambient light in the

room.

AV2 Output

Sets a signal to be output through the socket labelled / 2 on the rear of the

TV. If you connect a VCR or other recording equipment to the / 2 socket,

you can then record from the equipment connected to other sockets of the TV.

“TV”: Outputs a broadcast.

“AV1”: Outputs signals from equipment connected to the / 1 socket.

“AV5”: Outputs signals from equipment connected to the / 5 socket.

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

/ 3 and HDMI IN 4 sockets).

Quiet Power On

Sets the volume control at a low level when the TV is first turned on, gradually

increasing the sound to a preset level.

Speaker

Switches on/off the TV’s internal speakers.

“On”: The TV speakers are turned on in order to listen to the TV’s sound through

TV’s speakers.

“Off”: The TV speakers are turned off in order to listen to the TV’s sound only

through your external audio equipment connected to the audio output sockets.

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”,

or “PAL60”) according to the input signal from the input source.

Information

Displays your TV’s system information.

All Reset

Resets all the Set-up settings to the factory settings and then launches the Auto Start-

up screen.