Timberk THU UL 43 E Инструкция по эксплуатации онлайн [15/20] 707237

IM2020

 Every day fill the tank with fresh filtered water and keep the unit clean.

8. OPERATION OF THE DEVICE

Control panel

- On/Off

- Steam intensity adjustment / SLEEP mode

- Timer settings

- Constant humidity switch

Switching on

Install the appliance vertically on a flat and dry surface, fill the tank with water then connect the device to the

power line. Press the button. The device will start to operate in low steam intensity mode. At the very

beginning of operation, the atomizing level may appear unstable, which is caused by the temperature

difference and water quality. It will take a short period time for this process to stabilize.

Adjusting steam outlet intensity

Press the button to adjust steam outlet intensity and select SLEEP mode. After turning on the

device, it will operate in low steam intensity mode. Press the button one time to select medium

steam intensity. Press the button again to select high steam outlet intensity. Press the button third

time to enter SLEEP mode.

The more steam comes out, the stronger and faster air humidification will be. Comfortable conditions are

reached at 40 to 60% relative air humidity. You can yourself determine the comfortable humidity level or use

hygrostat function by pressing the button.

ATTENTION!

If a large amount of condensate is generated on the upper part of the appliance when it is operating, then

you need to decrease the steam outlet intensity by turning on/off and steam outlet intensity knob

counterclockwise.

ATTENTION!

In case of water shortage the button will light in red.