Home
Главная
Festool
Ленточная Шлифовальная Машина
RAP 150.03 E 570729
Инструкция по эксплуатации Страница: 10

Festool RAP 150.03 E 570729 Инструкция по эксплуатации онлайн [10/62] 8716

Technical data RAP 150.03 E

Power 1050 W

Speed 900 - 2500 rpm

Polishing pad up to 150 mm dia.

Weight (excluding cable) 2.7 kg

Degree of protection

/ II

The speciﬁ ed illustrations can be found

at the beginning of the operating instruc-

tions.

1 Intended use

The tool is intended for polishing painted

surfaces.

For reasons of electrical safety the machine

must not be damp nor operated in a humid

environment.

The user is liable for damage and

injury resulting from incorrect usa-

ge!

2 Safety instructions

2.1 General Safety Rules

Before using the machine, read the

enclosed safety instructions and the-

se operating instructions carefully

and thoroughly.

- Save all enclosed documents and pass the

machine with all these documents only.

- Never allow children to use the machi-

ne.

2.2 Tool-speciﬁ c safety rules

- This power tool is intended to function

as a polisher. Read all safety warnings,

instructions, illustrations and speciﬁ cati-

ons provided with this power tool. Failure

to follow all instructions listed below may

result in electric shock, ﬁ re and/or serious

injury.

- Operations such as grinding, sanding, wire

brushing or cut-off are not recommended

to be performed with this power tool. Ope-

rations for which the power tool was not

designed may create a hazard and cause

personal injury.

- Do not use accessories which are not spe-

ciﬁ cally designed and recommended by

Festool. Just because the accessory can

be attached to your power tool, it does

not assure safe operation.

- The rated speed of the accessory must

be at least equal to the maximum speed

marked on the power tool. Accessories

running faster than their rated speed can

ﬂ y apart.

- The outside diameter and the thickness of

your accessory must be within the capa-

city rating of your power tool. Incorrectly

sized accessories cannot be adequately

guarded or controlled.

- The arbor size of wheels, ﬂ anges, backing

pads or any other accessory must properly

ﬁ t the spindle of the power tool. Acces-

sories with arbor holes that do not match

the mounting hardware of the power tool

will run out of balance, vibrate excessively

and may cause loss of control.

- Do not use a damaged accessory. Before

each use inspect the accessory such as

polishing pads for chips and cracks, ba-

cking pad for cracks, tear or excess wear.

If power tool or accessory is dropped, in-

spect for damage or install an undamaged

accessory. After inspecting and installing

an accessory, position yourself and bys-

tanders away from the plane of the rota-

ting accessory and run the power tool at

maximum no load speed for one minute.

Damaged accessories will normally break

apart during this test time.

Wear personal protective

equipment. Depending on

application, use face shield,

safety goggles or safety

glasses. As appropriate, wear

dust mask, hearing protec-

tors, gloves and shop apron capable of

stopping small abrasive or workpiece frag-

ments. The eye protection must be capable

of stopping ﬂ ying debris generated by va-

rious operations . The dust mask or respi-

rator must be capable of ﬁ ltrating particles

generated by your operation. Prolonged

exposure to high intensity noise may cause

hearing loss.

- Keep bystanders a safe distance away

from work area. Anyone entering the

work area must wear personal protective

equipment. Fragments of workpiece or

of a broken accessory may ﬂ y away and

cause injury beyond immediate area of

operation.

- Position the cord clear of the spinning ac-

cessory. If you lose control, the cord may

be cut or snagged and your hand or arm

Festool RAP 150.03 E 570729 Инструкция по эксплуатации онлайн [10/62] 8716

Содержание

Похожие устройства