Home
Главная
Hotpoint-Ariston
Посудомоечные машины
CIS LI 470 A
Руководство по эксплуатации Страница: 6

Hotpoint-Ariston CIS LI 470 A Руководство по эксплуатации онлайн [6/24] 714176

Starting the dishwasher

1. Turn the water tap on.

2. Open the door and press the ON/OFF button: the indicator

light will illuminate.

3. Measure out the detergent (see below).

4. Load the racks (see Loading the racks).

5. Select the programme by pressing the WASH CYCLE

SELECT button; the corresponding indicator light will illuminate.

6. Select the wash options (see below).

7. Start the wash cycle by shutting the door: the machine will

emit a confirmation beep.

8. At the end of the cycle two short beeps will sound and the

WASH CYCLE indicator light will flash. Open the door, switch

off the appliance by pressing the ON/OFF button, shut off the

water tap and unplug the appliance from the electricity socket.

9. Wait for a few minutes before removing the crockery, in

order to avoid burns. Unload the racks, beginning with the

lower level.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection

process it is possible to change the cycle, provided that it has

only just begun: open the door, taking care to avoid the

escaping steam, and press the WASH CYCLE SELECT

button, holding it for 4 seconds. After one long beep and three

short beeps, the WASH CYCLE indicator light will switch off:

select the new wash cycle and start the programme by

shutting the door.

Adding extra crockery

Open the door, taking care to avoid the escaping steam, and

place the crockery inside the dishwasher. Close the door: the

cycle starts from the point at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a

power cut, the cycle stops. It starts again from the point at

which it was interrupted once the door has been shut or the

electricity supply is restored.

Loading the detergent

A successful wash also depends on the correct amount of

detergent being used, as recommended by the manufacturer.

Exceeding the recommended amount does not result in a

more effective wash and pollutes the environment.

Only use detergent which has been

specifically designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam

residue remaining in the machine after the cycle

has ended.

To obtain the best results from each washing and

drying cycle, powder detergent, rinse aid liquid and salt

should be used.

compartment Acompartment A

compartment A: Washing detergent

compartment Bcompartment B

compartment B: Pre-wash detergent

1. Open cover C by pressing button

2. Pour in the detergent after

consulting the

Wash cycle table

• for powder detergent use

compartments A and B

• for tablets, when the cycle

requires 1 tablet, place it in

compartment A and close the cover;

when it requires 2, place the second tablet at the bottom of the

appliance.

3. Remove detergent residues from the edges of the

compartment and close the cover until it clicks.

Start-up and use

* Only available in selected models.

Hotpoint-Ariston CIS LI 470 A Руководство по эксплуатации онлайн [6/24] 714176

Содержание

Похожие устройства