Saturn ST-VC0274 Руководство по эксплуатации онлайн [4/25] 716719

Saturn ST-VC0274 Руководство по эксплуатации онлайн [4/25] 716719
6
Using the vacuum cleaner
Before using the device, first roll out a
sufficient length of electric flex cable
and then plug the cleaner into the
mains socket.
The yellow mark on the electric cable
is the maximum length, this must not
be exceeded.
To switch on the device, press the foot
pedal button on the casing with your
foot.
To rewind the power cable, press the
button with one hand and guide the
cable with the other hand to ensure
that it does not whip causing damage.
Emptying dust container
Empty the dust container regularly, at
the latest when the quantity of dirt in
the dust container has reached the
“MAX” mark or the suction power has
dropped.
•Switch off the vacuum cleaner and
disconnect the plug from the mains.
To do this, always pull on the plug and
not on the cable.
•Release the dust container by
pressing down the release button (1).
•Lift the dust container forwards out
of the cylinder vacuum cleaner (2).
•When emptying the dust container,
hold it low over a dustbin.
•Press the open button. The base
opens and the dust runs into the
dustbin (3).
•Carefully knock the remaining dust
loose.
•Close the base.
•Place the dust container onto the
cylinder vacuum cleaner.
•Check whether the dust container is
securely seated.
Cleaning the motor filter
•Turn off and unplug cleaner.
•Remove the dust container.
•Open the dust container cover and
take the filter out.
•Hold the protective motor filter over
a dustbin. For a rough clean, gently
knock over a dustbin.
•Insert the dry protective motor filter
back into its holder.
7
•Place protective motor filter together
back into its receptacle.
•Replace the filter cover by hooking it
precisely from above first, and then
engage the lock by pressing it until
audibly clicks into place.
•Place the dust container onto the
cylinder vacuum cleaner.
•Check whether the dust container is
securely seated.
Important! Never use the vacuum
cleaner without a motor filter.
Cleaning the exhaust air filter
The exhaust air filter cleans the air a
final time before it leaves exhaust
sponge filter the vacuum cleaner. You
can clean the exhaust air filter as
follows:
•Switch off the vacuum cleaner and
disconnect the plug from the mains.
To do this, always pull on the plug and
not on the cable.
•Remove the dust container.
•Open the exhaust sponge cover.
•Rinse the sponge filter under cold
running water and allow dry.
•Put the exhaust air filter back into
place.
•Close the exhaust sponge cover.
TRANSPORT AND STORAGE
•You can lift and carry the vacuum
cleaner using the carrying handle.
Never pull or lift the vacuum cleaner
by the cord.
•Before putting the vacuum away,
rewind the cord. Switch off the socket,
unplug, and press the cord rewind
button until the cord is fully rewound.
•To save space, the vacuum can be
stored upright on its end cover. The
telescopic tube can be hung on the
vacuum cleaner by inserting the
parking fixture into the vertical
parking holder.
CLEANING
•Unplug the vacuum cleaner from the
mains.
•Clean the vacuum cleaner body by
wiping it with a slightly damp cloth.
•You must not use any form of strong
solvent or abrasive cleaning agent.
•Wait until dry before next use.

Похожие устройства

Скачать